Is that over on Heights Blvd.?

No... This show was in the back lot of La Centerra in Katy...

Looking great!
Any more pics from the show or finished?

More picks please!

Just read the build cover to cover. Only glanced at it until now. Great build and documentation!

Can't wait to start my 993 conversion!

Nash_TDI, are you putting a 3.6 in a 911 or an LS in a 993?

Haha, neither. Converting a 993 to diesel. Don't worry it won't be slow either.

Ah. That is intriguing. Share a link when you get started...

I'm going to do some pro shots. I'll post them up soon.

Hal

What motor? And are you sure that's a good idea? 993 prices are on the rise...

Just sayin'

Don't want to clog your thread, when my project gets some steam I will post a thread.

My car is a little rough. I couldn't bring myself to do it to a clean running 993.

http://i306.photobucket.com/albums/n...psaol82s4e.jpg

Motor of choice. 3.0L TDI best numbers out of one so far are 420hp and 600ft/lb
https://www.goapr.com/news/wp-conten...3/02/30tdi.jpg

Perfect.

Any idea how much that motor weighs? I'd also check the dimensions. I measured a Coyote motor and I figured it to be too large because the twin overhead cams. I know nothing about that motor but I assume it's a quadcam.

http://forums.pelicanparts.com/uploa...1464552489.jpg


http://forums.pelicanparts.com/uploa...1464552509.jpg

http://forums.pelicanparts.com/uploa...1464552521.jpg

http://forums.pelicanparts.com/uploa...1464552531.jpg

http://forums.pelicanparts.com/uploa...1464552545.jpg

http://forums.pelicanparts.com/uploa...1464552564.jpg

http://forums.pelicanparts.com/uploa...1464552576.jpg

http://forums.pelicanparts.com/uploa...1464552588.jpg


http://forums.pelicanparts.com/uploa...1464552606.jpg

http://forums.pelicanparts.com/uploa...1464552825.jpg

http://forums.pelicanparts.com/uploa...1464552846.jpg

http://forums.pelicanparts.com/uploa...1464552918.jpg

http://forums.pelicanparts.com/uploa...1464552930.jpg

http://forums.pelicanparts.com/uploa...1464552941.jpg

http://forums.pelicanparts.com/uploa...1464552952.jpg

http://forums.pelicanparts.com/uploa...1464552997.jpg

http://forums.pelicanparts.com/uploa...1464553023.jpg

http://forums.pelicanparts.com/uploa...1464553087.jpg

http://forums.pelicanparts.com/uploa...1464553131.jpg


http://forums.pelicanparts.com/uploa...1464553175.jpg

http://forums.pelicanparts.com/uploa...1464553191.jpg

http://forums.pelicanparts.com/uploa...1464553203.jpg

http://forums.pelicanparts.com/uploa...1464553225.jpg

http://forums.pelicanparts.com/uploa...1464553241.jpg

http://forums.pelicanparts.com/uploa...1464553253.jpg


http://forums.pelicanparts.com/uploa...1464553264.jpg

http://forums.pelicanparts.com/uploa...1464553283.jpg

http://forums.pelicanparts.com/uploa...1464553378.jpg

http://forums.pelicanparts.com/uploa...1464553402.jpg

http://forums.pelicanparts.com/uploa...1464553415.jpg


http://forums.pelicanparts.com/uploa...1464553427.jpg

http://forums.pelicanparts.com/uploa...1464553439.jpg
http://forums.pelicanparts.com/uploa...1464553454.jpg
http://forums.pelicanparts.com/uploa...1464553464.jpg
http://forums.pelicanparts.com/uploa...1464553473.jpg
http://forums.pelicanparts.com/uploa...1464553482.jpg

I'm thinking this is a finished project...

Another one of the reasons I was so attracted to your thread. All the info in it. From research the motors the weights are very comparable. The motor is fairly rare especially in the aftermarket sector.

I mocked up a 2.7T Audi gas motor that theoretically is the same dimensions.

http://i306.photobucket.com/albums/n...pssoivolxo.jpg

Congratulations on a Beautiful Job Hal
 

Hal - Very nice, what a Car, what an inspiration, one of the best on here.
I'm still pushing mine, getting closer, inch by inch. You certainly took us all to school.
Thanks for sharing.

"Hans not stuck" anymore
http://forums.pelicanparts.com/suppo...s/beerchug.gifhttp://forums.pelicanparts.com/suppo...s/beerchug.gifhttp://forums.pelicanparts.com/suppo...s/beerchug.gif

Thanks Jeff! Kind words...

Hal