Looking to do a Ls swap? Parting out my project
 

I figured somebody here who's not cruising the classifieds regularly might be interested in the parts I have. I'm getting out of the car project scene for a while, abandoning my 930 ls3 swap, and selling everything.

I'd love to make somebody a package deal and help them get a head start on their project. I have:

*A rebuilt 930 4 speed transaxle.
http://forums.pelicanparts.com/porsche-911-used-parts-sale-wanted/714741-rebuilt-930-4-speed-late-bellhousing-os-giken-lsd.html (Asking $5500)

*Kennedy Engineering trans adapter and clutch/pressure plate setup/high torque starter - ($2,000 from kennedy)

http://i112.photobucket.com/albums/n...h/P1000149.jpg
http://i112.photobucket.com/albums/n...h/P1000151.jpg
http://i112.photobucket.com/albums/n...h/P1000153.jpg
http://i112.photobucket.com/albums/n...h/P1000159.jpg

A low mile (under 3,000) forged LS3 making 522 rwhp and 480 rwtq. Almost complete (i have coil packs, plugs, wires, new gaskets, timing cover, sensors, valve covers, throttle body, intake manifold) - (Over $8,000 invested)

http://i112.photobucket.com/albums/n...h/P1000183.jpg
http://i112.photobucket.com/albums/n...h/P1000140.jpg
http://i112.photobucket.com/albums/n...h/P1000144.jpg

A renegade hybrids mounting cradle - no pics, but can get them if it helps make a sale. Never used, still in the wrapping. Paid $900 from Renegade.

A custom wiring harness with the correct orientation of injectors for the reverse manifold, meant for no mass airflow sensor (will require a speed density tune) and brand new Drive By Wire pedal. - $700.

A stainless headers (Stainless Headers Mfg., Inc. fabricates custom headers in stainless and mild steel ) mockup kit to make your own custom headers. I had to put $600 deposit down on this.

The only things you would really need are a little assembly of the engine (pushrods, rockers, gaskets, etc), a water pump and cooling system, ecm.

I'll let everything here go for $14,250, plus shipping. That's a cash price.

PM me with any interest. Thanks for looking!

The engine and transaxle have been sold. The renegade hybrid cradle, trans adapter, clutch setup, and a custom engine/DBW harness with everything correctly made for the reverse facing intake manifold are all still available.

Please PM with offers/interest.

DBW harness has been sold. I still have the cradle, bellhousing adapter, clutch/flywheel/tob, high torque starter, and the mock-up header kit from Stainless Headers. I'd love to make somebody a package deal on everything.

PM sent.

The header kit essentially comes with a set of header flanges, collectors, and adjustable elbows. You buy yiur own pvc piping to connect the elbows and mockup the headets as you see fit, secure the elbows in place, take a few dozen pictures, and ship it all back to them. They charge about $1800-2000, with a $600 deposit required just to get the mockup kit. Id sell it for a couple hundred less if you want it.

Kennedy parts - clutch/tob/starter/flywheel/adapter, and renegade cradle pending sale.

Still available: Lights, custom v8 header mockup kit (paid $600 as a deposit towards headers to get the kit, you get the kit and save on the deposit)

Anything still available? Cradle? Adapter Plate?

Sorry, i updated my other thread ( http://forums.pelicanparts.com/7348731-post9.html ) but not this one once the parts sold. The only thing i have left is the custom header kit from Stainless headers.