73 RSR look Hot rod - Signal Orange

[Elombard]

$23000 Firm

Fresh build just completed to help pay for my daughters Private School Tuition....so its a good cause.

Dyno proven 230-240 Fly Wheel HP
Scaled at 2400lbs with ¾ tank of gas

1975 Chassis - No Rust - No emissions in SO Cal
No Sunroof
Roll up windows
Steel rear flares
FG front fenders, front and rear bumpers
Steel hood
Originally Brown – Glass out re-paint to Porsche Signal Orange. Many areas taken to bare metal.
Turn signal and horn grill fitment could be improved.
Door gaps are good for FG fenders but not perfect.
Original black trim was stripped and/or sanded to aluminum, again not perfect.
Car looks shockingly good from 10 feet but if you are very OEM Concours this may not be the car for you!

Wheels
OEM Turbo 9 and 7 Fuchs with near new tires. They were refinished in the past and are very nice but no longer perfect.

Engine
Engine built at Franz Blam in Tucker GA.
3.2 ltr
Race prepped crank (knife edged)
Aftermarket Rods and Pistons, appropriate for a Carb’d car. Runs perfectly on premium gas.
Custom Cams to work with carbs, and Pistons
Crank fired distributor-less ignition, single plug.
SSI stainless headers with heat.
PMO Carb’s
A lot of time was spent jetting and setting up the carbs and it shows. Starts easily and idles and runs perfectly.
Recent Dyno sheets show 200 HP at the rear wheels on a Dyno Jet. That was at 6500 rpm, redline is at 7000. More Horsepower with an open muffler.
Engine has less than 5000 miles
New engine bay sound pad.

Fresh Heavy Duty Bilstiens.

Interior
New black headliner,
New RS Carpet kit
RSA door panels
Prototipo wheel with 1.5” spacer
Stock seats with covers.

Transmission
Rebuilt < 5K miles with 7:31 R&P Shifts great.

Other
Has complete AC system…not charged needs a fitting, can repair or delete on request

What is left to do before the car is picked up:

- I still need to put bumper seals in

PPI – I welcome and expect PPIs but I live pretty far out of Atlanta and I am a busy professional with young children. I will do my best to accommodate a PPI with minimal cost/hassle. The quickest/easiest way may be to have the car flat bedded to a shop of your choice. I will arrange picking the car up. There is a Mechanic local to me who has not worked on the car but is supposedly very good with air cooled Porsche’s. Franz Blam may be a good choice as well. Also, I have the equipment to do a leak down and compression, if you are knowledgeable and can trust me we can do the PPI in my garage.

Price:
$23,000 Firm

I will arrange for shipping (at your expense)

I have a note on the car with the Delta Airlines Credit Union. It will need to be settled.

Interested over seas parties. Happy to work with you. In the end though I will have to have certified funds in my bank account before the car leaves my garage.

Please Pm or e-mail me (elomard@bellsouth.net) and I will send my phone number.

[Elombard]

http://s669.photobucket.com/albums/vv55/Elombard/

Lots and lots of pictures.

[Elombard]

Update for price reduction

[Elombard]

Price reduction.

[Elombard]

Yummy

NOTHING makes you feel like this car when you are on the road!

This is my favorite shot.

[Elombard]

Back on Ebay. No one has even looked at it yet??? Nothing wrong with the car.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&_trksid=p3907.m32&_trkparms=tab%3DSelling&item=130296254172&viewitem=


9.9:1 CR
Ti rods
mod S cams
ported polished
race valve springs and ti retainers
knife edged crank

Good stuff!

[Elombard]

deal done pending PPI at the above price.

[Elombard]

Well nuts.
The deal fell through. Somebody snap it up so I can give him back his full deposit.

I have cleaned up some more details and I am considering RAISING the price in the next Ebay run!!! :-)

I had to adjust a couple of minor details that were discovered during the PPI and included in the above add. NOTHING Major.

[Elombard]

Mods please delete this thread. I started another one with all data in the first page.

Thanks