911 stuff

[ty901]

1) SWB turn signals; 1 nice the other 3 are cores. $50 all or none.
2) After market oil return tubes: $30 / 4
3) SWB interior door handles; cores $20 / 2 SOLD
4) LWB rear lenses: US lenses are silver trim; one is nice the other 2 have faults. Euro is black w/ most of the black gone & a crack @ the leading mount hole: $50 all or none SOLD
5) License plate frame: PORSCHE CARRERA Do my other cars really matter (metal not plastic) Mint $25
6) 911S quarter window; nice, but no latch: $50
7) Black quarter windows, good; no latches: $40 / 2
8) Sugar scoop stuff. The 2 w/ external adjusters are almost perfect. The 4 earlier ones all have faults, but the plastic inserts are not broken. $50 all or none.
9) SC (?) bumper extension: $10 / 2
10) SWB fog light covers: one is nice the other has some minor rust pitting (read: skim coat) and needs a new mounting bolt: $75 SOLD
11) ’66 accessories manual: VGC to EXC $250 SOLD
100% satisfaction as always. All prices plus actual shipping.
Thanks for listening.
Jerry

[ty901]

the rest of the pix;

[Glenn at Pelican Parts]

I'll take the rear lenses. Shipping will be to Riverside, CA 92507

[Jays72T]

If for some reason Glenn falls through, I'll take the rear lenses.

[pyite20v]

Id like the sugar scoops if they will fit on whatever stock lenses I have on my 87 carrera without too much effort. Shipping to 94121

[ty901]

Glenn;
sent you a PM.
pyite:
i *think* these will fit your car. i'll try the Tech. board.
thanks
jerry

[ty901]

pyite;
try this;

http://forums.pelicanparts.com/porsche-911-technical-forum/350204-headlight-fitment.html#post3306485

best
jerry

[chris sharpe]

Drivers side door stay? Tarret plate and rubber bushing. Thanks for your help. Do you have any pics of the door handles?

[red 69]

i would like the door handles 20 dollors for both, how much for shipping to 90805? thanks-do you take money orders.

[chris sharpe]

What shape are the door handles in? SHipping to 92111. thanks for your help. chris

[Shaun @ Tru6]

jerry, if the oil return tubes aren't spoken for, I'd like them for my E. Are the O-rings good or should I get new ones?

BTW, did I tell you that you have an eagle eye? Both top threads have been helicoiled on my case. Have it upside down for safe keeping on the engine stand...also ready to pull of exchangers.

[ty901]

cris;
i'll have the check the top side of the driver side, but i think the vinyl is okay and could just be reglued. i purposely pictured the bottom side to show that bit if surface rust. $5 post to you. is it's over that, i'll cover it.
Shaun;
i would replace the seals. i bought these here a year or so ago, then discovered the real problem was the seal between the oil filter console & the tank. another thing to think about "...while you're at it" ? Christian ('a quiet boom' here) is the guy w/ the ALU insert kits. this is something everyone w/ a MAG case needs to consider. i found this on the Tech board under a thread Wayne started titled, IIRC, 'the dirty little secret about Timeserts'. (basically, the fact that steel and MAG don't mix that well) also, Christian's broken head stud repair kit is now available. replace broken head studs IN THE CAR. check this out;

A tail of burnt spaghetti and broken exhaust studs.

ANOTHER great idea for the DIY crowd. isn't this board great ??!!
cheers
jerry

[73.5blackT]

I'll take the fog light cover plates.
Let me know.

[Shaun @ Tru6]

Originally posted by ty901

Shaun;
i would replace the seals. i bought these here a year or so ago, then discovered the real problem was the seal between the oil filter console & the tank. another thing to think about "...while you're at it" ? Christian ('a quiet boom' here) is the guy w/ the ALU insert kits. this is something everyone w/ a MAG case needs to consider. i found this on the Tech board under a thread Wayne started titled, IIRC, 'the dirty little secret about Timeserts'. (basically, the fact that steel and MAG don't mix that well) also, Christian's broken head stud repair kit is now available. replace broken head studs IN THE CAR. check this out;

A tail of burnt spaghetti and broken exhaust studs.

ANOTHER great idea for the DIY crowd. isn't this board great ??!!
cheers
jerry

Thanks Jerry, one quick question. Just looked up these on Pelican. I'll get the outer seals, think I need the inner ones too? Don't want to be penny-wise pound foolish, but also don't want to buy what I don't need...they are $4 each for the inners, 2 per tube.

I'll contact Christian about my helicoils and may have to talk with him about exhaust studs too...hope those come out nicely. turning into a much bigger project than imagined.

let me know how to pay your for the tubes.

S

[ty901]

Shaun;
maybe the best think would be to send these to you & then decide which ones you want? to be honest, i can't tell which ones are on there now and maybe they're actually okay.
fair ?
Steve;
sent you a PM w/ payment details.
thanks!
jerry

[Shaun @ Tru6]

perfect Jerry, thank you!

[red 69]

still would like the door handles. let me know, pm-e-mail . thanks

[ty901]

Originally posted by red 69
still would like the door handles. let me know, pm-e-mail . thanks

my apologies for dropping the ball on this earlier this morning... when i was still a quart low on coffee
...and just so we're clear these are INTERIOR door handles as pictured above.
$5 for post to you.
i'll PM payment details.
thanks!
jerry

[ty901]

Originally posted by chris sharpe
Drivers side door stay? Tarret plate and rubber bushing. Thanks for your help. Do you have any pics of the door handles?

i may have the door stay. you'll have to tell me what year car we're talking about as there are several styles.
re: the door handles, i am selling INTERIOR door handles as pictured above. RED 69 is first in line.
thanks and my apologies for the confusion.
jerry

[red 69]

thanks i'll be looking out for your e-mail - pm so i can get the int handles.