|
They are interchangeable. Just use the spindle nut and washer that goes with the spindle, since there are large and small versions. Early vs late
19mm is definitely too much for 15” wheels. The most I raise them with 15” wheels is 15mm, and even then I usually have the roll the forward lips on the control arms. With some offsets and rim thicknesses, I’ve had to shave the ball joint nut.
Btw the downside to the Boge is the spindles can’t be raised without major fabrication.
__________________
'69 911E coupe' RSR clone-in-progress (retired 911-Spec racer)
'72 911T Targa MFI 2.4E spec(Formerly "Scruffy")
2004 GT3
|