[Eduardo Castrejón Elbjorn]

Today was my first time that I tried to fill the radiator but was difficult to tried to fill the radiator by the water deposit (filler cap ). Because don´t admits a lot of water.

I don´t know if I need to wait until the temp goes up.

I disconnected the head water hose and filled the radiator by this hose then I started the engine, after some seconds the water wents out by the head hose neck ( not a lot of water, I impressed about the little pressure , I supose that when is completely dilated tha thermostat will be more pressure, I hope) then I connected the hose and continue filling the radiator by the filer cap.
I continue running the engine until the fan turns on and I continue filling until the level is correct, I pressed the hose to try to take out some bubbles.

which or what is the correct way ?