To complete the cage, forward bars have to be added.
They connect the main hoop with the A Pillars and forward floor/rocker panel.
First small plates have to be temporarily attached to their footings.
Porsche's have small indents in the forward rockers to facilitate an appropriate footing.
The plates sit almost flush because of this indent.
Here is the passenger side front plate fastened with screws.
After careful miter cutting of the tube it fits well.
It has to be slightly angled over so that the top has 1 inch clearance to the dash and 1/2 inch clearance to the A Pillar.
Driver's side.
