1980 930 stock offsets and spacer

[jimtweet]

i took my wheels off to measure for custom wheels today and i cant seem to find any offset numbers

its a 1980 930 euro

i have factory spacers front and rear

if i measured correctly, front spacers are coming out to 21mm? and the rears around 27-28mm?

the stock fuchs read 16x7 and 16x8 but i do not see any offsets

i think i read the fronts are an et 44? and the rears et???

[jimtweet]

No one?

[jimtweet]

anyone to confirm this?

[jimtweet]

one more time

[Stein]

spacer should be21mm front and 28mm rear.
stock wheels 9" et 15, 8" et 10.6, 7" et 23.3

[proffighter]

Why you ask again? Aren't youre questions answered here in your 1st thread?

http://forums.pelicanparts.com/911-930-turbo-super-charging-forum/580725-help-wheel-sizes-offsets-please.html

[jimtweet]

Originally Posted by proffighter

Why you ask again? Aren't youre questions answered here in your 1st thread?

http://forums.pelicanparts.com/911-930-turbo-super-charging-forum/580725-help-wheel-sizes-offsets-please.html

actually no, they were not answered in that thread, there is nothing in that thread about stock spacer size and offset

[proffighter]

Ok, I checked my genuine manual:

No offsets there, but spacers are up to '81 Front 21mm (old 2piece rotor) and rear 28mm

And these Fuchs are available again (ET=offset):

Fuchsfelge 6Jx15 ET 36
Fuchsfelge 7Jx15 ET 23,2
Fuchsfelge 7Jx16 ET 23,3
Fuchsfelge 8Jx15 ET 10,6
Fuchsfelge 8Jx16 ET 10,6
Fuchsfelge 9Jx15 ET 3
Fuchsfelge 9Jx16 ET 15

Checke them here:

Teile-Neuauflagen - Classic Originalteile & Literatur - Porsche Classic - Dr. Ing. h.c. F. Porsche AG

[jimtweet]

Originally Posted by proffighter

Ok, I checked my genuine manual:

No offsets there, but spacers are up to '81 Front 21mm (old 2piece rotor) and rear 28mm

And these Fuchs are available again (ET=offset):

Fuchsfelge 6Jx15 ET 36
Fuchsfelge 7Jx15 ET 23,2
Fuchsfelge 7Jx16 ET 23,3
Fuchsfelge 8Jx15 ET 10,6
Fuchsfelge 8Jx16 ET 10,6
Fuchsfelge 9Jx15 ET 3
Fuchsfelge 9Jx16 ET 15

Checke them here:

Teile-Neuauflagen - Classic Originalteile & Literatur - Porsche Classic - Dr. Ing. h.c. F. Porsche AG

yes that is what i needed thank you