Pelican Parts Forums - Time to upgrade Jeff NJ's 930

Pelican Parts Forums (http://forums.pelicanparts.com/index.php)

- 911 / 930 Turbo & Super Charging Forum (http://forums.pelicanparts.com/forumdisplay.php?f=222)

- - Time to upgrade Jeff NJ's 930 (http://forums.pelicanparts.com/showthread.php?t=845988)

Quote:

Originally Posted by Jeff NJ (Post 8773348)

Bought an external mic for the gopro and finally got a decent video today. Really getting to enjoy the 930 this past month.

LOVING that I can hear the turbo whistle, the off throttle burbles, cracks and pops and no wind noise at speed with the gopro and external mic setup.

Use proper speakers and enjoy:

<iframe width="560" height="315" src="https://www.youtube.com/embed/HcE9A2JkiGM" frameborder="0" allowfullscreen></iframe>

I really need to dial in the WUR. I just don't know where to start. I am definitely too rich and have pressure gauges and a PLX wideband AFR gauge, but every time I read another thread about it, I get more confused. Little help anyone? Where do I start?

Niiice! I just put my Rarlyl8 street on and sounds just like that.. glad I heard yours because so I know that's the way it should sound :D On full boost they scream!! Love it! Same here on running too rich. Have you tried adjusting the fuel mixture screw on the fuel head? http://forums.pelicanparts.com/support/smileys/wat6.gif

Quote:

Originally Posted by JacobS911 (Post 8773357)

Thanks Jacob! I did make a small adjustment to the fuel mixture screw because it was pig rich (10-11 AFR at idle), but I have a Leask adjustable WUR, so I need to adjust that to get proper AFR throughout.

Nice !!! You must be pumped.

Most Excellent!!
Glad to see that Durabilt HFS found such a good home.
If it wasn't 10 AM I'd have a beer after watching that :)

Congrats and good to see you're enjoying the car.

Re: AFR, how rich are you on top? If you don't have data logging, have someone ride with you and do a full throttle pull in 3rd. Have the observer note max AFR at higher RPM and then use that info to make adjustments to the WUR. Better still get some time on the dyno.

The Leask unit comes with excellent instructions. You have them, yes?

Hey Jeff, i can help with your AFR's . I'll PM you my number, maybe we can get you set

Helio

Quote:

Originally Posted by heliolps2 (Post 8773830)

Hey Jeff, i can help with your AFR's . I'll PM you my number, maybe we can get you set

Helio

Thanks Helio! Got your PM. I'm headed out on my boat right now, so maybe we can talk tonight.