Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/index.php)
-   911 / 930 Turbo & Super Charging Forum (http://forums.pelicanparts.com/forumdisplay.php?f=222)
-   -   What am I doing wrong here? (http://forums.pelicanparts.com/showthread.php?t=908822)

93097004xx 04-03-2016 09:44 PM

What am I doing wrong here?
 
I can say for the some time these end caps have stumped me. What am I doing wrong here? Are there a rear set I am missing. The catalog only show left and right but no front or rear?

http://uploads.tapatalk-cdn.com/2016...e18331ae16.jpg

http://uploads.tapatalk-cdn.com/2016...a08f489007.jpg

http://uploads.tapatalk-cdn.com/2016...51a6de303c.jpg


Sent from my iPhone using Tapatalk

Ronnie's.930 04-03-2016 10:21 PM

Is this what you have ---->

Pelican Parts - European Automotive Parts and Accessories - Porsche • BMW • Mercedes • Volkswagen • Audi • Saab • Volvo • MINI

That's the part number straight from the Porsche PET (much different that what is stamped on the part in your pic).

Same part number for front and rear, left and right (right front = left rear & left front = right rear).

93097004xx 04-03-2016 10:29 PM

Yes but something is big time wrong I'm beginning to wonder if these are for boxed rockers


Sent from my iPhone using Tapatalk

93097004xx 04-03-2016 10:38 PM

Here is the part numbers my 930 is a 1979

http://uploads.tapatalk-cdn.com/2016...99a7e5d8de.jpg

http://uploads.tapatalk-cdn.com/2016...ad3d2a0418.jpg


Sent from my iPhone using Tapatalk

93097004xx 04-03-2016 10:49 PM

These are factory 930 end caps. I must be doing something wrong..

http://uploads.tapatalk-cdn.com/2016...869f0bdef2.jpg


Sent from my iPhone using Tapatalk

Ronnie's.930 04-03-2016 10:57 PM

I just looked in the 1979 PET - the original part number(s) listed for your car is this -

Pelican Parts - European Automotive Parts and Accessories - Porsche • BMW • Mercedes • Volkswagen • Audi • Saab • Volvo • MINI

And if you look at the "note" it shows that the number has been superseded to the one in my first post.


And I just noticed that the part number on your caps has also been superseded to the first number I posted.

Ronnie's.930 04-03-2016 11:02 PM

The end cap does not go all the way to the top of the rubber molding - there is a gap of about 7mm from the top edge of the rubber molding to the top edge of the end cap when installed. Is that what you are talking about? it looks to me like you just need to push the bottom of the end cap in harder, and/or press the whole thing inwards harder until the screw holes line up.

93097004xx 04-03-2016 11:08 PM

Quote:

Originally Posted by Ronnie's.930 (Post 9065178)
The end cap does not go all the way to the top of the rubber molding - there is a gap of about 7mm from the top edge of the rubber molding to the top edge of the end cap when installed. Is that what you are talking about? it looks to me like you just need to push the bottom of the end cap in harder, and/or press the whole thing inwards harder until the screw holes line up.


Can you do me a HUGE favor and take a detailed pic of how your rear end cap mates to your rocker panel?


Sent from my iPhone using Tapatalk

Ronnie's.930 04-03-2016 11:30 PM

I can't seem to get a decent pic with the garage lights - either too dark or too much glare, so will try in daylight tomorrow.

93097004xx 04-03-2016 11:43 PM

What am I doing wrong here?
 
Thanks I'm thinking that these are not really meant for 930 but they can be made too. I remember before my car went to be painted the originals fit perfectly. These are not contoured right and they do not fit the contour of the rocker panel at all.

Two possible reasons here.

#1 these are not 930 end caps.

#2 there was change to the contour and size of the 930 outer rocker.

Not sure which or any reason is the case but one think is certain.

These will not go on with out a LOT of muscling, forcing and they still don't fit the contour of the rocker panel/ fit sloppy with a huge gap.

Anyone that could help me would be greatly appreciated.




Sent from my iPhone using Tapatalk

93097004xx 04-04-2016 07:49 AM

Solved these are NOS Porsche outer rockers I had replaced when the car was painted. There is a tab at the bottom of the rocker that needs bent up. See the pics below.

http://uploads.tapatalk-cdn.com/2016...ebfc812481.jpg

http://uploads.tapatalk-cdn.com/2016...ee88022552.jpg


Sent from my iPhone using Tapatalk

Ronnie's.930 04-04-2016 11:36 AM

^^^

Great that you figured it out and can use the caps you already have!

93097004xx 04-04-2016 09:07 PM

Here and my sport seats too.

http://uploads.tapatalk-cdn.com/2016...e687edb22c.jpg

http://uploads.tapatalk-cdn.com/2016...5a4ec26374.jpg

http://uploads.tapatalk-cdn.com/2016...f3e5f0aa6c.jpg

http://uploads.tapatalk-cdn.com/2016...a85ab8fafc.jpg

http://uploads.tapatalk-cdn.com/2016...6407b492c8.jpg


Sent from my iPhone using Tapatalk

356911930 04-04-2016 10:05 PM

Are those sport seats? Don't look right.

Rahl

vintagecarlover 04-05-2016 03:21 AM

Quote:

Originally Posted by 356911930 (Post 9066771)
Are those sport seats? Don't look right.
Rahl

He's right. They don't look right. Send them to me cause those sport seats will look much better in my car.
Rahl. Those are perfect sport seats

93097004xx 04-05-2016 10:03 AM

What am I doing wrong here?
 
Thanks just installed the seats and end caps over the weekend.


Sent from my iPhone using Tapatalk

Skillet83 04-05-2016 05:13 PM

Car looks amazing. Put some more pics up please!

93097004xx 04-05-2016 06:38 PM

Here are a few more.

http://uploads.tapatalk-cdn.com/2016...939f25d4f9.jpg

http://uploads.tapatalk-cdn.com/2016...de44ea0a8d.jpg

http://uploads.tapatalk-cdn.com/2016...34561783f5.jpg

http://uploads.tapatalk-cdn.com/2016...e3acc2f9e8.jpg

http://uploads.tapatalk-cdn.com/2016...2da5c2b20b.jpg


Sent from my iPhone using Tapatalk


All times are GMT -8. The time now is 11:54 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.