Stud Study

[Forrestkhaag]

Does anyone out theere know the thread pitch and diameter specs for the case stud on a 3.0 / the one on top of the engine opposite the starter? I am mating a 901 box to my 82 3.0 engiine and that stud does not even get out of the three inch deep tranny bell housing metal. I would like to buy the correct thing first time.

thanks

[Flat6pac]

That stud is 10 X 1.5 x 102
With a 901 transfer s the factory used an Allen head bolt there and it has to be long enough to attach the starter too
Bruce