Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/index.php)
-   Boxster & Cayman Forum (http://forums.pelicanparts.com/forumdisplay.php?f=14)
-   -   torque values (http://forums.pelicanparts.com/showthread.php?t=609933)

rcarpen22 05-21-2011 03:55 PM
torque values
 
Hey does anyone have a Bentlet manual and a few minutes to give me some torque values? I'm in the middle of IMS bearing replacement and need pressure plate bolt torque and torque for transmission bolts. I have 101 Projects but no Bentley:-( Thanks!

prohovie 05-21-2011 06:28 PM
Good timing............Just finished my IMS upgrade this afternoon on my 2000 S
The pressure plate to Flywheel bolts are 23Nm ( 17 ft-lbs)
The transmission to engine bolts are all 85 NM (63 ft-lbs), except for bolt 'A' in Waynes
book which is torqued to 45Nm (33 ft-lbs)
Hope this helps..................Pat

WhipE350 05-21-2011 09:11 PM
Quote:
Originally Posted by prohovie (Post 6036675)
Good timing............Just finished my IMS upgrade this afternoon on my 2000 S
The pressure plate to Flywheel bolts are 23Nm ( 17 ft-lbs)
The transmission to engine bolts are all 85 NM (63 ft-lbs), except for bolt 'A' in Waynes
book which is torqued to 45Nm (33 ft-lbs)
Hope this helps..................Pat
Thank you I just bookmarked this thread...sure it will come in handy soon.

rcarpen22 05-22-2011 05:38 PM
Thanks!


All times are GMT -8. The time now is 12:30 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.