930 gearbox for sale
 

Hey guys, I'd thought I'd throw this out there, because I doubt I'll use this in my lifetime. From my 87 930 with 70K miles, rebuilt with all wear parts replaced. Factory LSD with stock gears. $5K. + shipping. Philiphttp://forums.pelicanparts.com/uploa...1388252813.jpg
http://forums.pelicanparts.com/uploa...1388252835.jpg

Good luck on your sale.

thanks for the bump Dave.
 

Did you find the intake manifold you were looking for? I have one which is homed out to about 40 mm, going cheap if you want it. Philip

Hi Phillip

Turns out the intake ports on my heads measured 36mm. 40mm might work. Mark is going to fab up some Phenolic spacers for my injector blocks. They are going to have a taper bore. So 40mm would work.

How much you asking for the manifold? Would it include the throttle body?

Have you decided to keep your injectors? I am in the market for some 56lbs injectors.

Let me know.

Thanks

John

Hello John, I'd do $200 for the Manifold. I also have aluminum injector blocks to fit, but for CIS injectors. They could be modified. I was going to keep my injectors, as I bought a 964 FPR. I saw some new ones go by in the FS section, but they sold for $200. I also have a modified fan shroud to fit the injector block. Your stock one may not fit over them.