Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/index.php)
-   MINI Discussion Forum (http://forums.pelicanparts.com/forumdisplay.php?f=229)
-   -   Question on Driving Light Installation (http://forums.pelicanparts.com/showthread.php?t=946762)

Jay (guest) 02-20-2017 10:50 AM

So after I undo screw does it come off into two parts I undo the screw and I've tried pulling screwing but can't get into it

__________________
This post was auto-generated based upon a question asked on our tech article page here: MINI Cooper Driving Light Installation (R50/R52/R53 2001-2006) | Pelican Parts DIY Maintenance Article

Casey at Pelican Parts 02-20-2017 10:50 AM

The lens and the metal ring around the lens should pop off together, I would think.

- Casey

Jay (guest) 02-21-2017 09:15 AM

So you reckon undo the screw then prise it off with screwdriver as it won't come apart

__________________
This post was auto-generated based upon a question asked on our tech article page here: MINI Cooper Driving Light Installation (R50/R52/R53 2001-2006) | Pelican Parts DIY Maintenance Article

Casey at Pelican Parts 02-21-2017 09:16 AM

Yes it looks like there is a little pry indentation at 12 o'clock position.

- Casey


All times are GMT -8. The time now is 01:12 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.