Pelican Parts Forums - 2020 New Random Pics

OK, how does that work?

I have fairly complex passwords for my multiple financial and bank accounts. Upper and lower case letters at random, and lots of comic book cussing with^&#!*%# mixed in.

If I miss type one bit of it, bam, start over. Three times and I am locked out and either have to wait for a set period of time, or call and talk to a human and have them set a new random password that I have to log in with and then reset my password.

Not one of them would allow the bad guys to hammer away with a brute force attack at the site. And on the most sensitive and attacked sites, I have two factor authentication and use an app or they text my phone number.

http://forums.pelicanparts.com/uploa...1679752230.jpg

http://forums.pelicanparts.com/uploa...1679752230.jpg
The Orion spacecraft in the well deck of USS Anchorage after being recovered from the Pacific Ocean, 5th December 2014

http://forums.pelicanparts.com/uploa...1679752230.jpg

http://forums.pelicanparts.com/uploa...1679752230.jpg

http://forums.pelicanparts.com/uploa...1679752230.jpg
Those are not leaves, all of them are living insects!

http://forums.pelicanparts.com/uploa...1679752230.jpg
OK, no more deer hit damage!

Racerbvd

03-25-2023 08:47 AM

http://forums.pelicanparts.com/uploa...1679762771.jpg
http://forums.pelicanparts.com/uploa...1679762771.jpg
http://forums.pelicanparts.com/uploa...1679762771.jpg
http://forums.pelicanparts.com/uploa...1679762771.png
http://forums.pelicanparts.com/uploa...1679762771.jpg
http://forums.pelicanparts.com/uploa...1679762771.png
http://forums.pelicanparts.com/uploa...1679762771.jpg
http://forums.pelicanparts.com/uploa...1679762771.jpg

Racerbvd

03-25-2023 08:53 AM

Racerbvd

03-25-2023 08:54 AM

Racerbvd

03-25-2023 08:56 AM

Racerbvd

03-25-2023 08:57 AM

http://forums.pelicanparts.com/uploa...1679763376.jpg
http://forums.pelicanparts.com/uploa...1679763376.jpg
http://forums.pelicanparts.com/uploa...1679763376.jpg
http://forums.pelicanparts.com/uploa...1679763376.jpg
http://forums.pelicanparts.com/uploa...1679763376.jpg
http://forums.pelicanparts.com/uploa...1679763376.jpg

masraum

03-25-2023 08:58 AM

Quote:

Originally Posted by A930Rocket (Post 11955678)

911 in the new Matrix movie?

http://forums.pelicanparts.com/uploa...1679734939.jpg
http://forums.pelicanparts.com/uploa...1679734939.jpg

The series "Will Trent" about a quirky detective also includes a 911 (you've seen it in the first 15 seconds of this trailer).

<iframe width="1280" height="720" src="https://www.youtube.com/embed/Iy9PoT19ujk" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

Racerbvd

03-25-2023 08:59 AM

http://forums.pelicanparts.com/uploa...1679763465.jpg
http://forums.pelicanparts.com/uploa...1679763465.jpg
http://forums.pelicanparts.com/uploa...1679763465.jpg
http://forums.pelicanparts.com/uploa...1679763465.jpg
http://forums.pelicanparts.com/uploa...1679763465.jpg
http://forums.pelicanparts.com/uploa...1679763465.jpg
http://forums.pelicanparts.com/uploa...1679763465.jpg

Racerbvd

03-25-2023 09:03 AM

Racerbvd

03-25-2023 09:04 AM

masraum

03-25-2023 09:35 AM

It's hard (impossible really) to imagine what the US looked like before the logging and the hunting of the buffalo.

http://forums.pelicanparts.com/uploa...1679765976.jpg

https://1.bp.blogspot.com/-2A0kqK-Jr...r+,+1870+2.jpg

http://forums.pelicanparts.com/uploa...1679765490.jpg
1919- Seattle, Washington. Stacks of lumber drying at the Seattle Cedar Lumber Manufacturing Company's mill in Ballard. Located just west of the Ballard Bridge, it was the largest in Ballard. At the mill, logs were cut into lumber which was then dried for at least nine months before being sold. The stacks of drying lumber were over 50 feet high. In this photo, a workman stands partway up one of the tall stacks of drying lumber.

https://rarehistoricalphotos.com/wp-...graphs-10.webp

https://rarehistoricalphotos.com/wp-...graphs-13.webp

https://rarehistoricalphotos.com/wp-...graphs-18.webp

https://rarehistoricalphotos.com/wp-...graphs-30.webp

Racerbvd

03-25-2023 09:47 AM

GH85Carrera

03-25-2023 10:53 AM

http://forums.pelicanparts.com/uploa...1679770307.jpg
Fantastic Moon Close-Up!
The red marked spot is where Apollo 15 landed (1971).
Photo by James Harrop Skywatcher MAK180, ASI224MC.

http://forums.pelicanparts.com/uploa...1679770307.jpg

http://forums.pelicanparts.com/uploa...1679770307.jpg

http://forums.pelicanparts.com/uploa...1679770307.jpg

http://forums.pelicanparts.com/uploa...1679770307.jpg
Shipboard Radio Room in the late twenties to early thirties - note the vacuum tube transmitter in the right corner of the operator's desk. The photo is from an October 1932 issue of Radio News showing the radio room of the ship "Discovery II." Seahawk, is that how you remember the radio room? :p

http://forums.pelicanparts.com/uploa...1679770307.jpg
A Marconi BD848 TV camera at the BBC, circa 1965. Glad video cameras got smaller and much higher resolution for cell phones.

Seahawk

03-25-2023 12:15 PM

Quote:

Originally Posted by GH85Carrera (Post 11956024)

Seahawk, is that how you remember the radio room? :p

Actually, you Rat Bastard (:cool:), I do: "Radio" was the only link we had in the 80's and it wasn't much, but it was freezing in there. The OS's all wore sweaters and you had to have a clearance to get in the room.

During all my Dets on Small Boys, we had to go to "Radio" and have the OS's beam our daily SITREPS back to San Diego, get any "P4's" for the Det and get the print out of the headlines.

Completely different world.

rattlsnak

03-25-2023 02:48 PM

Quote:

Originally Posted by Racerbvd (Post 11955913)

http://forums.pelicanparts.com/uploa...1679762771.jpg

^^ That's an old photo of madonna. This one below is more recent.. Good grief.. What has she done???

http://forums.pelicanparts.com/uploa...1679784373.jpg

Steve Carlton

03-25-2023 07:00 PM

GH85Carrera

03-26-2023 05:46 AM

http://forums.pelicanparts.com/uploa...1679838320.jpg

http://forums.pelicanparts.com/uploa...1679838320.jpg

http://forums.pelicanparts.com/uploa...1679838320.jpg
This is a GM 6046 two-stroke twin diesel engine as used in the M4A2 variant of Sherman.
This engine was made up of two General Motors 6-71 inline six diesel engines, for a total displacement of 13.9 liters (850 cu in). It produced 410 hp, while max torque was 1,350 Nm (1,000 ft-lb) at 1,400 rpm.
With this setup, M4A2 Shermans had the benefit of being able to run on a single engine in emergencies if one was damaged. It was also used in M10s based on the M4A2 chassis.
Production of Shermans with the 6046 began in 1942, and were mainly used by Britain and the USSR. Some were used by the US Marines.
It is often thought that Allied tanks did not use diesel, in reality, the US produced 11,000 diesel-powered M4A2s.

http://forums.pelicanparts.com/uploa...1679838320.jpg
A cut-away diagram of the 16-inch turrets on board the North Carolina class
The turret occupied five levels of the ship. Three turrets were constructed on the North Carolina, two on the bow and one behind the superstructure, each with three big cannons. More than 150 men were required to keep each turret working properly and the guns firing. Built to go head to head with the guns of other battleships at seas, the 16s became the major weapon for island bombardment.

http://forums.pelicanparts.com/uploa...1679838320.jpg

http://forums.pelicanparts.com/uploa...1679838320.jpg

All times are GMT -8. The time now is 08:03 AM.

Page 625 of 984

625

Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.