Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Miscellaneous and Off Topic Forums > Off Topic Discussions


Reply
 
LinkBack Thread Tools
Author
Thread Post New Thread    Reply
Registered
 
Join Date: Mar 2004
Location: Los Angeles
Posts: 18,337
WTF, no one has any red wood

Building a large gate, and a craftsman fence for an old client around their property. No one has any Redwood and its all back ordered if they can get any. 90 bucks + for a 4x4 10' post. No clear lumber in stock. This is kicking my azz. This is suppose to be stop gap job before We start on the next big project. What a mess.

Old 10-02-2026, 03:26 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Baz Baz is online now
G'day!
 
Baz's Avatar
 
Join Date: Sep 2008
Location: New Smyrna Beach, Florida
Posts: 50,566
Garage
What's a craftsman fence, Jeff?
__________________
Old dog....new tricks.....
Old 10-02-2026, 03:41 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
Registered
 
Join Date: Dec 2016
Location: Napa
Posts: 3,272
Use 4x4 PT posts and cap the posts with 1x redwood on the good side of the fence. PT posts last longer than the crappy farmed tree redwood anyway
Old 10-02-2026, 03:54 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)
Registered
 
Join Date: Mar 2004
Location: Los Angeles
Posts: 18,337
Its inspired by the Arts and Crafts Movement or Craftsman/bungalow. I can't seem to upload any pics.
Old 10-02-2026, 04:00 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)
Baz Baz is online now
G'day!
 
Baz's Avatar
 
Join Date: Sep 2008
Location: New Smyrna Beach, Florida
Posts: 50,566
Garage
Quote:
Originally Posted by look 171 View Post
Its inspired by the Arts and Crafts Movement or Craftsman/bungalow. I can't seem to upload any pics.
Like this?

__________________
Old dog....new tricks.....
Old 10-02-2026, 08:28 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)
Leadfoot Geezer
 
rcooled's Avatar
 
Join Date: Jan 2006
Location: Santa Cruz, CA
Posts: 3,418
Quote:
Originally Posted by look 171 View Post
No one has any Redwood...
Decent quality redwood is getting harder & harder to come by. My house was built back in 1941 and it's all redwood...even the framing. Beautiful stuff too...all heartwood, no knots, no sapwood, and really tight grain. Nearly impossible to find anything like that now...

Quote:
Its inspired by the Arts and Crafts Movement...
A masterpiece of Arts & Crafts design...the Gamble house in Pasadena, CA
__________________
'67 912, '70 911T, '81 911SC, '89 3.2 Targa - all sold before prices went crazy
'25 BMW 230i coupe - current DD
'67 VW Karmann Ghia convt. & '63 VW Beetle ragtop - ongoing projects
Old 10-02-2026, 08:50 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)
 
Registered
 
Join Date: Mar 2004
Location: Los Angeles
Posts: 18,337
Quote:
Originally Posted by rcooled View Post
Decent quality redwood is getting harder & harder to come by. My house was built back in 1941 and it's all redwood...even the framing. Beautiful stuff too...all heartwood, no knots, no sapwood, and really tight grain. Nearly impossible to find anything like that now...



A masterpiece of Arts & Crafts design...the Gamble house in Pasadena, CA
They are difficult to source due to cost while everyone is using other materials instead. I know a few yards that are still able to get quality lumber but this time around, they throw their hands up shaking their heads. While VG Doug Fir and Cedar has gone through the roof, more then redwood.

Oh yeah, the Gamble House. Spent a lot of time there studying the G n G brother's design when I remodeled one of their home few years back. Sadly it went up in flames with the Altadena fire.
Old 10-03-2026, 01:38 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)
Registered
 
Join Date: Mar 2004
Location: Los Angeles
Posts: 18,337




BAZ,

Yes, that's similar style. 4x steel pole will be used for the large gate welded to hinges to a steel frame sandwiched by 1 1/2" clear red wood gate so view from both side, all will be seen is Redwood, with no steel showing. The arbor on top will be dovetailed to show off the joints. Whenever possible, a routed pocket will be needed for a 1/8'' SS steel plate with screws to keep the joints from opening up on gate and other areas.

I built an entry gate and repaired some of the porch for the guy across the street when we remolded this client's house but he was out of funds after that for the much needed white picket fence. He's been pestering me for a couple years now but I jsut can't seem to find the time to do this for him. Finally I have a hole in our schedule, I have to keep my promise. I enjoy this kind of work. Heavy timber yet somewhat intricate work, a bit different then building cabinets or doing interior finish carpentry. I am going to get my hands dirty on this one.
Old 10-03-2026, 02:03 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #8 (permalink)
Registered
 
Join Date: Mar 2004
Location: Los Angeles
Posts: 18,337
Quote:
Originally Posted by gregpark View Post
Use 4x4 PT posts and cap the posts with 1x redwood on the good side of the fence. PT posts last longer than the crappy farmed tree redwood anyway
The post will be 6x6 held off the ground by some Simpson heavy duty construction clips for the reason you mentioned. I am not going to sink a post like that into the ground only to have it rot out in under 10 years. We are using V grooved redwood fence panels. Every third panel, there will be a 1" window slot cut out to match the typical Craftsman style motive. Most of that will be pre-cut in the shop before installation on site. I better get good with that router table and make good accurate jigs.
Old 10-03-2026, 02:36 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #9 (permalink)
Baz Baz is online now
G'day!
 
Baz's Avatar
 
Join Date: Sep 2008
Location: New Smyrna Beach, Florida
Posts: 50,566
Garage
Quote:
Originally Posted by look 171 View Post
I am going to get my hands dirty on this one.
Quote:
Originally Posted by look 171 View Post
Every third panel, there will be a 1" window slot cut out to match the typical Craftsman style motive.
Sounds wonderful, Jeff. And I totally understand your desire to finally get behind the promise you made to get this one done.

No wonder you are so frustrated!

-----------------

One of the reasons I didn't mind retirement from the landscape business is it was getting harder and harder to get materials. On top of that I was paying more for plants of lesser specification.

Getting material for a contractor is almost half the battle I imagine in many a trade.

------------------

Good luck my friend, I'm sure things will eventually work out. You strike me as a "can do" kind of person and will find a way - even if the project is a bit delayed - just roll with it, sir!

__________________
Old dog....new tricks.....
Old 10-03-2026, 06:35 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #10 (permalink)
Registered
 
Join Date: Dec 2016
Location: Napa
Posts: 3,272
Quote:
Originally Posted by look 171 View Post
The post will be 6x6 held off the ground by some Simpson heavy duty construction clips for the reason you mentioned. I am not going to sink a post like that into the ground only to have it rot out in under 10 years. We are using V grooved redwood fence panels. Every third panel, there will be a 1" window slot cut out to match the typical Craftsman style motive. Most of that will be pre-cut in the shop before installation on site. I better get good with that router table and make good accurate jigs.
Sono tubes and Simpson post brackets for sure. 6x6 redwood is expensive and the quality is not so great these days if you can even find it. Using 4x4 PT and boxing the posts with 1x redwood will give you roughly the dimensions you're after and a cleaner look using clear hand picked fence boards to clad the PT posts. And for those little windows you'll be making a jig for a hand held router (Not the router table)
Old 10-03-2026, 07:49 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #11 (permalink)
Registered
 
CurtEgerer's Avatar
I didn't know Redwood was even readily available anymore (maybe it's just a west coast thing?). Even 30 years ago, it was rare to find in the Midwest. I found some back then in a discount lumber outlet store for dirt cheap. Built an entire covered porch across our ranch house with it. So nice to work with. I'm sure the people who own the house today have no idea.
__________________
1983 AUDI Turbo Ur quattro
1987 PORSCHE 944 turbo
Old 10-03-2026, 09:23 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #12 (permalink)
 
Registered
 
Join Date: Dec 2016
Location: Napa
Posts: 3,272
All the redwood at big box stores and most lumber yards is from 8 year old farmed redwood trees. Puny trees full of sap wood and you're better off using Cedar. I can buy the real deal from a direct source here in Northern CA but I pay through the nose for it
Old 10-03-2026, 10:28 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #13 (permalink)
Registered
 
Join Date: Mar 2004
Location: Los Angeles
Posts: 18,337
Quote:
Originally Posted by gregpark View Post
Sono tubes and Simpson post brackets for sure. 6x6 redwood is expensive and the quality is not so great these days if you can even find it. Using 4x4 PT and boxing the posts with 1x redwood will give you roughly the dimensions you're after and a cleaner look using clear hand picked fence boards to clad the PT posts. And for those little windows you'll be making a jig for a hand held router (Not the router table)
You are thinking on the job. Nope, router table, all done in the shop, safer, faster and much more accurate. A couple of Desteco clamps and a couple stops on the jig. Perfect fit every time. With a 3 hp router and a new bit, Almost no need to rough cut. Its no fun to cut 300'+ fencing with a hand held router on the job.
Old 10-03-2026, 02:23 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #14 (permalink)
Registered
 
Join Date: Dec 2016
Location: Napa
Posts: 3,272
But aren't you cutting small diamond holes in long boards? If so I'd make a jig for the saber saw, clamp, cut and use a baby router with a round over bit to soften the little windows. I use my router table a lot but not when I'm dealing with 6' awkward boards unless I'm putting a detail on the full length. And you can't clamp a jig to the stock and make a cut on a router table unless your jig is wider than the table so the clamps are free and clear but why would you do it that way?

Last edited by gregpark; 10-03-2026 at 03:35 PM..
Old 10-03-2026, 02:39 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #15 (permalink)
Registered
 
Join Date: Mar 2004
Location: Los Angeles
Posts: 18,337
Not a diamond. Its basically a 12" long slot, 1" wide where the v grooved 1x6 fence panels meet. 1/2" is on the one side, the other 1/2" on the other board. The top and bottom is a semi circle. Its off set about 48" off the ground. They are about 66" in length.

A 12"x36" long jig is all its needed and a couple of Destco clamps (on the jig itself) it more then enough to hold the piece in place for cutting. An inverted flush cutting bit will do the trick. Plus, I have a spindle sander and such at the shop to get the jig cut perfectly. I can make the jig in 10 min.
Old 10-03-2026, 04:14 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #16 (permalink)
Registered
 
Join Date: Dec 2016
Location: Napa
Posts: 3,272
You don't need a jig for that, just the fence on the router table.
Old 10-03-2026, 04:30 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #17 (permalink)
Registered
 
Join Date: Mar 2004
Location: Los Angeles
Posts: 18,337
See the slot between the V-grooved fence board down below on the panel. That's what needs to be cut out. We have over 500 boards that need a slot cut. No fence. A jig is a must for quality production work

Old 10-03-2026, 05:02 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #18 (permalink)
Registered
 
Join Date: Dec 2016
Location: Napa
Posts: 3,272
You're making a straight cut, a jig is unnecessary. If you're making 500 cuts think of the time saved not dealing with clamps 500 times and using just a fence will be every bit as accurate. If your fence boards are 1x I'd use a ⅜" round over bit on a baby router and round over your cuts on both sides of the fence after it's built.
Old 10-03-2026, 05:23 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #19 (permalink)
Registered
 
Join Date: Mar 2004
Location: Los Angeles
Posts: 18,337
Not a complete straight cut. Semi circle on both ends. You ever use hold down or Destco clamps? I can remove a piece and clamp another in about 3-5 seconds tops with supreme accuracy. You are thinking c-clamps none are needed for this application. The stock is cut sitting on top of the jig. A block is screwed to the jig where the router bit exits to prevent grain blowouts. This is very typical production work with shop made jigs. By you suggesting the way it should be cut, I think you fail to understand the jig cutting method I am trying to describe.

It will take me about 15-20 min from fabrication of jig to actual cutting.

A 1/8" round over is needed to ease the edge not 3/8". That will round the 3/4 edges. It needs to be kept square to stay within the craftsman theme. I might make another jig to run along a special fence with stops to create the round over without having to think or see where to start or stop. That's a maybe. I like to get it all done at the shop instead of the field.

Old 10-03-2026, 05:44 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #20 (permalink)
Reply


 


All times are GMT -8. The time now is 08:15 AM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2026 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.