Random TRANSPORTATION pictures

[Racerbvd]

[group911@aol.co]

Originally Posted by wdfifteen

Looks like Dyans headed into the desert with their sand ladders.

Looks more like 2CV with a couple trucketts

[edgemar]

My uncle was on another Taquan flight that crash landed last year... I think I'm going to avoid that outfit..

Originally Posted by Jolly Amaranto

I just read on the Flight Safety Network website that Randy was flying level at 3300 feet and the Turbo Otter had been descending to that altitude from 3800 feet. Looks like the Otter's pontoons came down on the Beaver.

[kach22i]

BEMIL»çÁøÀÚ·á½Ç - À¯¿ë¿øÀÇ ±º»ç¼¼°è





Northrop Grumman X-47A Pegasus
https://en.wikipedia.org/wiki/Northrop_Grumman_X-47A_Pegasus


http://bemil.chosun.com/nbrd/bbs/view.html?b_bbs_id=10044&pn=10&num=18546#none





https://cellcode.us/quotes/grumman-x-pegasus-47a-northrop.html


https://cellcode.us/quotes/grumman-x-pegasus-47a-northrop.html

[kach22i]

May 15th 2019
BAE Systems 3D printing enables first ever flight using supersonically blown air
https://3dprintingindustry.com/news/bae-systems-3d-printing-enables-first-ever-flight-using-supersonically-blown-air-155452/

Drone development undertaken by BAE Systems in collaboration with The University of Manchester has reached a new landmark.

Earlier in May this year, the MAGMA unmanned aerial vehicle (UAV) successfully completed trials proving the capabilities of its “flap-free” flight technologies.

As a result, MAGMA is believed to have become the first vehicle in aviation history to be manoeuvred in flight using supersonically blown air, a technology which improves the complicated task of controlling an aircraft at low-speeds.......................

“Today BAE Systems is 3D printing our components out of titanium and we are flight testing them on the back of a jet engine in an aircraft designed and built by the project team. It doesn’t get much better than that.”...............

“We made our first fluidic thrust vectoring nozzle from glued together bits of plastic and tested it on a hair drier fan nearly 20 years ago.”

[JackDidley]

[JackDidley]

[kach22i]

https://crgis.ndc.nasa.gov/historic/1234#Jet_Exit_Photos

1960-03-07 Model in Jet Exit Building-Hawker VSTOL Model

1960-03-07 Model in Jet Exit Building-Hawker VSTOL Model

https://crgis.ndc.nasa.gov/historic/16'_TT_Models_in_Jet_Exit

1985 LO nozzle test

1977
https://crgis.ndc.nasa.gov/historic/File:1977_Five_Nonaxisymmetric_Nozzle_Concepts.jpg


Bell X-1 (June, 1951)
https://crgis.ndc.nasa.gov/historic/16-Foot_Transonic_Tunnel



https://crgis.ndc.nasa.gov/historic/16-Foot_Transonic_Tunnel

The photograph shows the Space Shuttle ascent configuration (shuttle rockets firing while solid rocket booster motors are still firing) in the 16-Foot Transonic Tunnel. Solid wood plumes are used to simulate rocket exhaust flow from both vehicles. This model was used to study the aerodynamic interactions between the shuttle, external fuel tank and solid boosters during ascent.

[URY914]

[URY914]

[Racerbvd]

[Racerbvd]

[jean-zac]

[URY914]

[URY914]

[Racerbvd]

[Racerbvd]

[abisel]

[Racerbvd]

[URY914]