Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/index.php)
-   Off Topic Discussions (http://forums.pelicanparts.com/forumdisplay.php?f=31)
-   -   should i throw parts at my fridge/freezer? (http://forums.pelicanparts.com/showthread.php?t=650579)

vash 01-13-2012 08:47 AM

should i throw parts at my fridge/freezer?
 
woke up this morning and started gathering breakfast stuff. opened the freezer and it was obviously not working. i have a thermometer stuck to the back wall and it was WARM! food was very frozen still because the compartment is stuffed full.

the fridge is getting electricity (lights come on). i jiggled the thermostat area and turned the freezer on cooler. nothing.. i started making repairman calls. i then heard the compressor turn on..it is now working and is back to less than zero degrees.

WTF? thermostat? defrost timer? or relay? parts can't be that expensive..can they? thinking of buying all three..and having them on hand for the next failure.

Joeaksa 01-13-2012 08:49 AM

Have you cleaned the dust and dirt off of the back and bottom underneath of the fridge in the last 10-20 years? It DOES make a difference...

red-beard 01-13-2012 08:52 AM

What Model do you have? The more modern ones which are computer controller are the most likely to fail.

vash 01-13-2012 08:55 AM

Quote:

Originally Posted by red-beard (Post 6491525)
What Model do you have? The more modern ones which are computer controller are the most likely to fail.


no..bottomline from Costco.. last time the repairguy showed up he said these units were bombproof. because of the lack of computer. i bought a plain unit to hold me off until a kitchen remodel. last time it was the thermostat. cost me $115 to plug in a new part.

JJ 911SC 01-13-2012 08:56 AM

Quote:

Originally Posted by Joeaksa (Post 6491521)
Have you cleaned the dust and dirt off of the back and bottom underneath of the fridge in the last 10-20 years? It DOES make a difference...

+1 and if you are worry about that it could stop again get yourself a fridge/freezer alarm. A lot cheaper then a useless maintenance call at this time.

recycled sixtie 01-13-2012 09:02 AM

How old is your freezer? If it is old then u might consider a new one. If it is newer then parts replacement may be the answer? SmileWavy

billybek 01-13-2012 10:27 AM

Just replaced a thermal overload on a friends fridge.
Condenser was plugged with dog hair and the compressor was getting too hot.

masraum 01-13-2012 10:44 AM

I've repaired some home appliances (including a couple of refrigerators), and have no special knowledge of them. I used information and ordered parts from:

A-1 Appliance : Appliance Parts & Repair Help - no affiliation other than being a happy customer.

troubleshooting info here that I have used as well.
Appliance Repair Manuals ONLINE for do it yourselfers

jmaxwell 01-13-2012 11:05 AM

I had a GE ca. 1995, I think, that would heat up the back of the freezer as part of its normal frostfree defrost cycle. the melted frost would trickle down the back wall into the drip pan below

romad 01-13-2012 11:10 AM

If its a old frig it could be hard starting and thermals off. Do you hear a clicking noises? Is the compressor really hot to the touch? Could be a bad starter or just an old compressor.

also could be as Jmaxwell said , you just catch it during a defrost period.


All times are GMT -8. The time now is 12:52 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.