Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/index.php)
-   Off Topic Discussions (http://forums.pelicanparts.com/forumdisplay.php?f=31)
-   -   electiracal fitting needed. (http://forums.pelicanparts.com/showthread.php?t=923625)

Joe Bob 07-30-2016 02:55 PM

electiracal fitting needed.
 
12v like the pics....any leads?
http://forums.pelicanparts.com/uploa...1469915734.jpg
http://forums.pelicanparts.com/uploa...1469915746.jpg

rattlsnak 07-30-2016 03:17 PM

Whats on the other end? looks like a typical power cable that can bought anywhere?

scottmandue 07-30-2016 04:10 PM

Yeah, looks like the plug end of a wall transformer or power supply?
Seeing as radio shack is now a glorified cell phone store hard to find small electrical parts, not impossible but difficult.
May be a lot easier to just to find a new power supply if you can match the voltage and current.

mreid 07-30-2016 04:12 PM

You gonna crimp it or solder it?

Joe Bob 07-30-2016 04:15 PM

12 v power supply, looking for female end, need a retailer or online supplier. All the radio shacks are kaput.

id10t 07-30-2016 04:23 PM

coax for power... check this page

Plugs w/ center pins | All Electronics Corp.

Bob Kontak 07-30-2016 04:24 PM

Quote:

Originally Posted by scottmandue (Post 9220434)
May be a lot easier to just to find a new power supply if you can match the voltage and current.

Ebay for the same power supply set up?

John Rogers 07-30-2016 04:39 PM

Willey's Electronics in National City CA. They have a web site and contact info but I am not sure if you can send them a picture to get what you need? There should be electronic supply centers close to Long Beach or near LAX where electronic repairs have to be done.

Jrboulder 07-30-2016 05:02 PM

Are you not familiar with fry's?

That's where elon musk gets tesla parts.

devodave 07-30-2016 05:16 PM

Try DigiKey, Mouser, or Newark. Mouser may be the best of the three, followed by DigiKey.

dad911 07-30-2016 05:52 PM

Amazon (my goto lately*) has them also. Search 'Barrel Connector' measured in metric if you have a set of calipers, ID & OD needed. Power is often 5.5mm by 2.5 or 2.1mm.

https://smile.amazon.com/s/ref=nb_sb_noss_2?url=search-alias%3Daps&field-keywords=barrel+connector

(* $28 bucks delivered, for a new screen and charge ports for my iPhone)

Joe Bob 07-31-2016 11:23 AM

OK, Fry's had the connectors but I have to make a cable to connect to a USB. See the pic, two poles on the connector and four wires on the USB......so how to hook it up?

http://forums.pelicanparts.com/uploa...1469989376.jpg

Gogar 07-31-2016 12:31 PM

I think you need 5v, not 12.

Anyway, red is positive, black is ground. Green and white are data.

SmileWavy

John Rogers 07-31-2016 12:38 PM

Try the website PINOUTS.RU as that one has the wire/color/pins for every computer and other connectors ever made. I use it in one of my computer networking hardware classes and it is very handy.

dad911 07-31-2016 01:24 PM

Quote:

Originally Posted by Gogar (Post 9221345)
I think you need 5v, not 12.

Anyway, red is positive, black is ground. Green and white are data.

SmileWavy

Quote:

Originally Posted by john rogers (Post 9221350)
Try the website PINOUTS.RU as that one has the wire/color/pins for every computer and other connectors ever made. I use it in one of my computer networking hardware classes and it is very handy.

You should use a tester to see which pins the wires go to.

Bill Douglas 07-31-2016 02:34 PM

Quote:

Originally Posted by Joe Bob (Post 9220358)
electiracal fitting needed.


If that's how you spell electrical it's probably best you don't touch it.

Annoying jokes aside... Op shops/junk shops/second hand shops are full of those things. The recycler at the dump here has lots of them. I think Wayne made a post a while back about a cheap way to replace laptop and phone chargers with recycled ones.

Joe Bob 07-31-2016 02:37 PM

I drink Bill, bite me....

Bill Douglas 07-31-2016 03:15 PM

So do I. That's why my jokes are either annoying or not even the slightest bit funny.

Joe Bob 07-31-2016 03:20 PM

I gotta a chuckle or it was maybe a fart....dunno, since I just tossed my cookies....

Bill Douglas 07-31-2016 04:14 PM

LOL.

You guys are five hours ahead of me. Probably too early in the day for me to start using my "Been on the pinot's" excuse for bad behaviour.


All times are GMT -8. The time now is 12:42 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.