|
|
|
|
| Author |
|
|
Registered
Join Date: Mar 2010
Posts: 213
|
Reinforcement plate on front pan
I'd like to know that the reinforcement is really necessary on the front pan? I restore my '69 911E, and on the old rusted pan there wasn't any. Now i replaced the pan but i don't know if i should put the reinforcements or not onto the pan...
|
||
10-01-2011, 02:28 PM
|
|
|
Registered
Join Date: Mar 2010
Posts: 213
|
This is not the picture of my car. I "stole" it from another thread.
|
||
|
10-01-2011, 02:29 PM
|
|
|
Registered
Join Date: Jan 2000
Location: St. Charles, MO
Posts: 1,925
|
Yes, you need to install those pieces.
They provide additional support for the attachment of the a-rms. Without them the threaded boss will twist in the metal and eventually cause the sheet metal to tear and fail. Last edited by abisel; 10-01-2011 at 04:09 PM.. |
||
|
10-01-2011, 04:06 PM
|
|
|
Bird. It's the word...
|
Yes, very necessary
__________________
John Forcier Current: 68L 2.0 Hotrod - build underway |
||
|
10-01-2011, 04:55 PM
|
|
1969 Porsche 911T 2.7RS Spec with Webbers
