![]() |
|
|
|
Registered
Join Date: Dec 2009
Posts: 311
|
Door Handel differences
I’ve stripped my 1970 T door Handel’s down for rechroming but the inners to the left Handel are different to the one on the right ,is this correct or is one from a different year of car
![]() |
||
![]() |
|
Been here a while
Join Date: Apr 2004
Location: East coast, west coast, typ. 35,000 ft
Posts: 2,442
|
1970 was an interesting year for door handles. The lock appears horizontal when viewed from the outside of the car, later cars, the lock is vertical.
also, the 'key-way' that the pushrod slides into is small and locks to the interior on the early handles, later handles, the latch pushrod slides over the outside key-way
__________________
looking for 1972 911t motor XR584, S/N 6121622 |
||
![]() |
|
Registered
Join Date: Dec 2009
Posts: 311
|
The inners of my Handel’s are different ,the inners on the right side of the above picture has a square thing on it where the threaded piece goes into ,but the one on the left has a fixed threaded piece is this how they should be or is one from a different year car
|
||
![]() |
|
Been here a while
Join Date: Apr 2004
Location: East coast, west coast, typ. 35,000 ft
Posts: 2,442
|
you are missing the threaded rod on the lower one. I would guess the lower one is later than the upper one.
__________________
looking for 1972 911t motor XR584, S/N 6121622 |
||
![]() |
|