Non sunroof interior dimension

[ebmbiker]

Good day folks,

Can someone please measure the interior height of a non-sunroof car as I need to know the clearance for my roll hoop?

As shown by the red line on the photo, I need the dimension from the roof liner to the ridge on the body.

Cheers,

JB

[Dpmulvan]

Measure from the headliner rod.

[ebmbiker]

Originally Posted by Dpmulvan

Measure from the headliner rod.

I don't have any rods or the headliner yet.

[Flojo]

just measured:
right angle/straigt up to headliner rod: ~88 cm
tilted back to furter headliner rod: ~86 cm

maybe someone else better confirm this to be legit

[ebmbiker]

Originally Posted by Flojo

just measured:
right angle/straigt up to headliner rod: ~88 cm
tilted back to furter headliner rod: ~86 cm

maybe someone else better confirm this to be legit

Flojo, thanks dude, much appreciated

[Flojo]

the headliner/rods are able to flex a little.
thus, don't be afraid to design the rollbar too high
especially the headliner strip between to rods is very flexible
so installing a bar that touches the headliner can be be moved upward half an inch higher for sure.

BUT: once the headliner is dented/punched/stretched it is "ruined".