X-faktory...current builds

[al lkosmal]

2.7RS builds...side by side.....old school Weber carbs on one.... EFI/ITBs on the other.



stay tuned.
al

[Tony V]

Al. Lovin it!
I’ll get the shipping going this week
Tony

[al lkosmal]

Tony,
headed your way......very soon!

regards,
al

[al lkosmal]

Tony's EFI 2.7RS is getting crated and shipped out this week.........





Stay tuned
al

[al lkosmal]

two 2.7RS engine shipped out in the last two weeks and then........this one followed me home........with lots of good bits included




I also have a 3.0 in the shop for a PMO EFI/ITB install..........

[al lkosmal]

Nice set of 42/39 ITBs on the assembly bench.....headed out soon to Derek for his big port 3.0



regards,
al

[eastbay]

Originally Posted by al lkosmal

two 2.7RS engine shipped out in the last two weeks and then........this one followed me home........with lots of good bits included




I also have a 3.0 in the shop for a PMO EFI/ITB install..........

Looking forward to your comments on the reincarnated PMOs and how they compare to Richards version.

[al lkosmal]

The 3.0 EFI install is underway.....but with a slight change of plans......a rebuild of the the 3.0 into a 3.2SS...with EFI of course.




stay tuned,
al

[al lkosmal]

The triangle of death at work on this one........and leaking just about everywhere else too!....but will be fine, once rebuilt into a 3.2SS







stay tuned
al

[Tony V]

Hey Al. At least there’s no glass on there!��
Tony

[al lkosmal]

Tony....so true...I did pour quite a bit of glass out of your heat exchangers.....glad you walked away from that mishap......relatively unscathed.

regards,
al

[al lkosmal]

very dirty/oily on the outside, but quite clean on the inside......




Crank headed out for inspection, magnuflux and Micro-polish....heads out for rebuild, etc......

It will clean up nicely.

stay tuned

al

[Tony V]

Al. Now you’ve got me thinking how difficult would it be to put that in my newly acquired 914?
Sure would be fun!

[al lkosmal]

Originally Posted by Tony V

Al. Now you’ve got me thinking how difficult would it be to put that in my newly acquired 914?
Sure would be fun!

Slippery slope, Tony..........but a 2.7RS in the 914 would provide serious moto-vation.

[al lkosmal]

Picked up my project cams yesterday.......
One for the 3.2SS and one for the 2.7RS....both came in STD/STD measure, Magnafluxed and Micro-Polished........they are purty.....

The 3.2SS is now in the assembly phase.....with the 2.7RS close behind.




stay tuned

al

[al lkosmal]

the 3.0 to 3.2SS is starting to take shape.....
Heads rebuilt by CGarr
P&Cs are in
Tranny rebuilt by John Walker
PMO EFI/ITBs w/M'squirt on the shelf....waiting

starting to take shape......





stay tuned
al

[al lkosmal]

the 3.2SS is starting to look real.....should be on the test stand, next week......can't wait to fire it up.....

from this:





to this:



MoBetta

al

[evan9eleven]

Beautiful work as always Al!

[RSN]

Looks amazing Al, thanks for sharing!

[al lkosmal]

Thanks, it is moving along nicely.......