Hazard Switch Woes

[BlueHorizon]

Hi all,

Progressing with my complete ground up build of my 911 backdate. Have a new front harness, fancy fuse box and am slowly progressing with the 12v lighting components. I have the headlights working as intended (hooray!), but am struggling with the hazard / indicator lights not wanting to play.

I have all the various diagrams but am struggling a bit as the colors are different on various diagrams and also the headlight switch implementations vary wildly depending on which I look at. To add to the fun my headlight switch has the "N" on it which I think is a later version.

Anyway, was hoping you could take a look at the wires below and answer a few questions:

1. Where do the yellow / yellow & red wires (from the indicator stalk) go to?
2. Likewise the Blue/black connector?
3. I currently have the black / green wire from the turn signals going to a black cable. Is that right?
4. Finally, I have one wire that doesn't appear to have a home in the fusebox. It's a white with blue stripe coming from the front harness. Any idea which fuse this should be mated with?

Thanks in advance!

[SpyderMike]

This might help:

https://forums.pelicanparts.com/porsche-911-technical-forum/857540-understanding-emergency-flasher-switch.html