As CIS newbie, to show that I've done my reading and done my penance, here is the yearly bump.

Had a night in the high 20’s (below freezing) the other weekend in Vermont with the SC. After a few attempts to get it started, including an almost-wants-to-run, I dialed the mixture about 1/4 of a turn richer and it started fine, did its usual high idle, and then settled down once warm.

I have a rebuilt, adjustable WUR but I’ve found it impossible to get real leverage on the 2mm (!) hex head after loosening the jamb nut with the WUR mounted. Probably need a 2mm T-head hex.

Scraped ice off the windshield too!

http://forums.pelicanparts.com/uploa...1731355113.jpg
http://forums.pelicanparts.com/uploa...1731355113.jpg