What did you do to your 911 today?

[Flojo]

Originally Posted by Tommy Z

Had a fun weekend of wrenching! Installed new drop links ...

absoluteley secure this type of droplink with big whashers ouside placed to avoid the rubber from popping out when twisting under full load!

[Pedro '84 Coupe]

Removed the cruise control module to send off for repair, fixed the broken cruise control cable at the throttle body and checked the clutch switch in the tunnel for proper operation. Then I took out the fan housing and strap to the get those and the fan and other hardware restored by flyingjay. Had to remove the distributor to get the fan strap out. Thinking about new A/C hoses, compressor, evaporator and condensers...

[snbush67]

This took me about three hours to run the wiring. I drilled a couple of holes to feed the cable through the tunnel and up through the dash.

Cave Creek Welding shop is great, super quality!

[Tommy Z]

Originally Posted by Flojo

absoluteley secure this type of droplink with big whashers ouside placed to avoid the rubber from popping out when twisting under full load!

Thanks Flojo. I was wondering about that but figured the integrated washer on the nut was sufficient. I’ll add the washers today when I do the tranny mounts. Thanks!

[Dsroth10]

replaced the front hood shocks and the glovebox light switch.

[Charlie V]

Dropped the engine/transmission due to oil leak on rear main seal. The clutch disc with only 15,000 kms on it and is oil soaked. Damn it!!

[Dsroth10]

Just saw this as I was scrolling through.

are these the vertical seals on the window of cabriolet? If so what material did you use... mine are in desperate need.

thanks

[Artfrombama]

Finished headliner, glass guy came by and put in a new windshield.

[Frog76S]

Originally Posted by Charlie V

Dropped the engine/transmission due to oil leak on rear main seal. The clutch disc with only 15,000 kms on it and is oil soaked. Damn it!!

Nice DIY job! Maybe we can meet for a drive in 2022.

[FrontGarage911]

I did a single step polish with a Rupes 15mm DA and Rupes Uno Pure compound on a white foam pad. Ceramic coated with P&S Inspiration Ceramic Coating, and topped off with P&S Bead Maker.



I need to do the wheels next.

[OffCamber00]

Originally Posted by redridge

Had this carrera script for 12 years, finally getting around to it. lol

I like the way you think.....

[famoroso]

Cleaned a set of P7 shod Fuchs Evo wheels off the car.

Fun Fact, the wheels & tires are light enough that they float. In fact, the 16x9, 245/45-16 are more buoyant than the 16x7, 205/55-16. Who knew?!

The wheel / tire is not touching the bottom of the bin in this pic...

[BRAIDusa]

#science

Originally Posted by famoroso

Cleaned a set of P7 shod Fuchs Evo wheels off the car.

Fun Fact, the wheels & tires are light enough that they float. In fact, the 16x9, 245/45-16 are more buoyant than the 16x7, 205/55-16. Who knew?!

The wheel / tire is not touching the bottom of the bin in this pic...

[famoroso]

Originally Posted by BRAIDusa

#science

"Yeah, Mr. White! Yeah, Science!"

I actually didn't need this other piece...



I suppose I could go with a lower water level, or the Rollastand will come in handy for cleaning bare wheels.

[omar9000]

What am I doing to my 911 today?

Nothing -- because I'm waiting for parts. Pelican accepted my order (and charged me) more than three weeks ago, but hasn't even shipped them yet.

[steve84]

Replaced the incandescent light bulbs in my dashboard gauges with LED bulbs.

[uscarrera]

Prepping car for Sebring PCA Club Race in a couple of weeks, welcome to our home race track all our northern friends.
Rich

[sean m]

Steve84..........great move. Love my dashboard with these

Easy and makes all the difference at night.

[Karl Koons]

I get 'er out whenever it is dry and above 45 degrees.

[snbush67]

Installed some houndstooth.