Rant - Page 6

chris_seven · 08-22-2016, 09:13 AM

We just use the early stud 901.101.172.03 and have done for about 7 years now.

Never had one fail or pull out.

We do use them on the top and bottom of the engine.

I am sure that there will be others that disagree but any stud that is made from a Ferritic or Martensitic Steel will have virtually identical CoE to the standard stud.

930cabman · 08-22-2016, 10:29 AM

Quote:

Originally Posted by safe

Could be worse. You could have bought a 996/997 that cracks the engine block or brakes the IMS bearing/shaft.... Which happens a lot sooner than 30 years/100.000+ miles....

There are plenty of cars with engines that lasts forever and ever without braking, but they are usually very boring and ugly compared to a 911.
You win some you lose some, time to make your engine fresh, spend a little to add a few HP with some upgrades.

I am up to speed with all of this. Our beloved Porsche's are high performance machines and after all, "speed costs, how fast would you like to go?

Vereeken · 08-22-2016, 11:14 AM

Quote:

Originally Posted by chris_seven

We just use the early stud 901.101.172.03 and have done for about 7 years now.

Never had one fail or pull out.

We do use them on the top and bottom of the engine.

I am sure that there will be others that disagree but any stud that is made from a Ferritic or Martensitic Steel will have virtually identical CoE to the standard stud.

Thanks even with the part number...

930cabman · 08-22-2016, 01:36 PM

From what I can tell our host does not offer that part number, most of theirs are prefixed with a PEL number, but several have a 993 - and 930 prefix.

Chris, where are the 901.172.172.03 studs you speak of available?

and how$$ in USD

timmy2 · timmy2's Garage

Google 90110117203 (you don't have the part number correct)
My local Porsche dealer has them for $7.11 each.

Rawknees'Turbo · 02:16 PM

Quote:

Originally Posted by 930cabman

From what I can tell our host does not offer that part number, most of theirs are prefixed with a PEL number, but several have a 993 - and 930 prefix.

Chris, where are the 901.172.172.03 studs you speak of available?

and how$$ in USD

Pelican shows they have them (the part number has been superseded). The OEM ones are the second option on the page linked below.

Pelican Parts - European Automotive Parts and Accessories - Porsche • BMW • Mercedes • Volkswagen • Audi • Saab • Volvo • MINI

Quote:

Originally Posted by 930cabman

Bob K = idiot.

nobody is interested in your negative responses, we cannot all be of your status

Bob's no idiot; he got a little riled up in this thread, but he is one of the most helpful, and funny, guys you will ever meet (on or off the forum).

930cabman · 08-22-2016, 02:59 PM

My apologies to Bob, I extend an olive branch

Vereeken · 08-24-2016, 05:05 AM

Ok so we need 90110117203.

What about torque specs.

Since we are changing from Dilavar to Steel is there another torque spec involved?

Rich Gas · 08-24-2016, 08:02 AM

Why was Bob banned? No warning? Did he post a penis? It is a stud topic...

Rawknees'Turbo · 08-24-2016, 09:55 AM

Quote:

Originally Posted by Rich Gas

Why was Bob banned? No warning? Did he post a penis? It is a stud topic...

Hey Rich, Bobasaurous got a week for a post with some errrrr, language and hostility in it (the post was deleted by a mod).

Vereeken · 08-24-2016, 12:06 PM

It was a good post. Do you want me to retype it

Bob Kontak · Bob Kontak's Garage

Quote:

Originally Posted by Vereeken

It was a good post. Do you want me to retype it

I could have made the same post without the "color" in two sentences.

I apologize to 930cabman with sincerity.

As usual, with most flames, something else was bothering me.............so let's see, I'll just beat the snot out of 930cabman and I'll feel better.

Not fair and I apologize.

930cabman · 08-31-2016, 12:40 PM

Meet you in the street in front of city hall and we can throw down.

Apology accepted

Glad to have you back

Rich Gas · 08-31-2016, 01:02 PM

Pelican Fight Club... Bob is Jack Reacher! Never apologize. Lather up boys, I'll sell the tickets.

Vereeken · 08-31-2016, 01:13 PM

Quote:

Originally Posted by Bob Kontak

I could have made the same post without the "color" in two sentences.

I apologize to 930cabman with sincerity.

As usual, with most flames, something else was bothering me.............so let's see, I'll just beat the snot out of 930cabman and I'll feel better.

Not fair and I apologize.

I thought it was funny, but sarcasm does not go well in text message.

But I could have sworn they banned you cause you where ugly....must have been mistaken.

Anyway back to technical content. My 36 year old SC decided to throw his studs out of the pram of#3....

Rawknees'Turbo · 08-31-2016, 01:19 PM

Quote:

Originally Posted by Rich Gas

Pelican Fight Club... Bob is Jack Reacharound! . . .

^^^

Fixed - you and Bobasaurous are welcome!!!

Bob Kontak · Bob Kontak's Garage

Quote:

Originally Posted by 930cabman

Glad to have you back

Thank you.

Bob Kontak · Bob Kontak's Garage

One can't even experience humility with honor here.

I am so ugly. On the upside, a girl at the Speedway gas station said something nice about my tooth the other day.

I have watched Jack Reacher about nine times since you turned me onto it, Rich.

FWIW, The Edge of Tomorrow is a very good movie. Yes, Big Tom.

Rawknees'Turbo · 08-31-2016, 01:36 PM

Quote:

Originally Posted by Bob Kontak

On the upside, a girl at the Speedway gas station said something nice about my tooth the other day.

Did she say it looked sexy wiff that pink, doughnut sprinkle stuck to it?!?!

Rich Gas · 08-31-2016, 01:36 PM

Tim said the Mexican authorities finally kicked Bob out...he was doing weird stuff with their pets.