18" or 17" Kinesis k27's built to spec / any width / custom
 

SOLD

Want a custom set of 5x130 Kinesis K27's with polished faces, built to whatever width desired in 18" OR 17"?

http://i674.photobucket.com/albums/v...ltz/k27051.jpg

I can build these K27's as 18's or 17's. As narrow as 7.5", as wide as 14". Whatever you want (to a certain extent, I only have so many inners and outers available). Offsets would obviously depend on width.

Here are three width / offset examples of how these could be built (For these scenarios, I used a 7.5" inner. Keep in mind, if I built them with a wider inner, the offset would get higher. If I use a narrower inner, the offset would get lower. The two rear centers have a thicker center pad, creating a lower offset, and the two front centers have a narrower center pad, creating a higher offset):

Rear lower offset center built as a 9" wide wheel with 1.5" outer and 7.5" inner, 51mm offset
Front higher offset center built as a 9" wide wheel with 1.5" outer and 7.5" inner, 65mm offset

Rear lower offset center built as a 10.5" wide wheel with 3" outer and 7.5" inner, 32mm offset
Front higher offset center built as a 10.5" wide wheel with 3" outer and 7.5" inner, 47mm offset

Rear lower offset center built as a 12" wide wheel with 4.5" outer and 7.5" inner, 13mm offset
Front higher offset center built as a 12" wide wheel with 4.5" outer and 7.5" inner, 28mm offset

Prices:
17" set - $2150 + $95 shipping
18" set - $2490 + $125 shipping

*one of the rear centers has a custom 15mm spacer bolted onto the back side of the center, as this was a replacement center with a thinner pad (it needed the custom spacer to make it the same as the other side). If it weren't for this detail, the prices would be higher.*

18x1.5" outer:
http://i674.photobucket.com/albums/v...ltz/k27042.jpg

18x5.5" outer:
http://i674.photobucket.com/albums/v...ltz/k27043.jpg

17x2" black outer:
http://i674.photobucket.com/albums/v...ltz/k27049.jpg

http://i674.photobucket.com/albums/v...ltz/k27053.jpg

thatcher.shultz@gmail.com

Well finally some deal on a set of 18's. I've always caught you with sets of 17's so now my interest is peaked. Can I simply tell you what I'm currently running and see how close you can get? Its a 993TT bodied SC and currently running 996TT wheels and way too much spacers (I didn't build it as I wouldn't have bought new hollow twists to run 15lbs of spacers).

PM sent

Wheels
 

See pm

PM replied, thanks

wow, a lot of interest about these wheels! we'll see who steps up to the plate, i dont think these will last very long.

can't believe it's already wednesday!

You have a pm with a few questions

I don't have any PM's from you that I know of, sorry

wheels
 

I tried again

got it, thanks

sold to jerry, they will be built as a 17x9 17x11 set.

Hey Thatcher im looking for wheels and have some questions for you is there any way you can contact me at 562-652 6019