|
|
|
|
| Author |
|
|
Registered
Join Date: Oct 2003
Location: Lakeville Massachusetts
Posts: 288
|
F/S Twin Plug 930 based engine 310 hp cheap
I have changed this post as I wrote it poorly the first time.
This is a 930 based engine, Crankcase, rods, crank , oil pump, heads, cylinders. It is a twin plug engine fired by twin Electromtive HPV1 with Clewett wires, crank triggered. The bottom end has been carefully assembled and the crank is a standard/standard crank. The Cylinders are in perfect condition and I have installed new rings because the engine was not run for three years. The heads have been ported by Stimson and recently checked and have new valve stem seals and the upper end resealed with new gaskets and RSR rocker shaft seals. The cams are Elgin 296/304 .525 lift and it has Carrera tensioners installed. The intake valves are 52mm and the compression ratio is 10.3:1 using JE wedge pistons. The manifolds are match ported and 46 mm Webers were properly jetted and prepared on a dyno using K&N filters and Carbon fiber watershields. The engine has a Fidanza aluminum flywheel set up for a pull style 225 mm clutch. The photos do not show the carbs as they are being cleaned. The 914-6 engine tin in the photo is not part of the package, nor is the oil cooler. I will provide a solid pressure tested 911 oil cooler for this engine properly installed with new seals. The oil return tube and front engine mount are also not part of the package. The engine has not been run since the reseal, but when it was first built made a touch over 310 hp. It is clean and would make a very nice trackday engine or very hot street engine. The original bill on this engine was a tad over 21,000. This is a steal at this price. 12,500 plus shipping from Massachusetts Thanks for looking,  Erik 508-524-3145  
Last edited by Thorshammer; 11-18-2009 at 05:41 PM.. Reason: Poor 1st write up |
||
11-17-2009, 05:42 PM
|
|
|
Registered
Join Date: Oct 2003
Location: Lakeville Massachusetts
Posts: 288
|
930 Based engine
I have gotten a few calls on this, and many questions. I rewrote the ad, because it was not very good the first time. This engine is a very good unit for the price.
Thanks again for looking. I have found a few more photos Erik   
|
||
|
11-18-2009, 04:34 PM
|
|
|
Registered
Join Date: Jul 2008
Location: St. Petersburg, FL
Posts: 2,497
|
bumpo
__________________
'87 Carrera - 2400 lbs of Track Beast!! '88 Carrera Cab - Too nice for the track. '85 Targa - Salvage title that was not caught! |
||
|
11-19-2009, 05:34 PM
|
|
|
Registered
Join Date: Oct 2003
Location: Lakeville Massachusetts
Posts: 288
|
Joe,
Thanks for the bumpo, looks like alot of people selling items these days. Thanks, Erik |
||
|
11-20-2009, 05:10 AM
|
|
|
Registered
Join Date: Sep 2005
Posts: 950
|
free bump...good looking motor there! Oh great price too..
|
||
|
11-20-2009, 06:11 AM
|
|
|
Registered
Join Date: Oct 2003
Location: Lakeville Massachusetts
Posts: 288
|
Sale Pending, working out the details.
Erik |
||
|
11-20-2009, 02:21 PM
|
|
|
