100mm 3.5L or 3.3L engine case and cylinders

[edbaus]

Hi,

I am selling 100mm pistons and cylinders and an engine case that has had the spigots bored to accommodate the 100mm cylinders.

The reason I say 3.5L or 3.3L is if you build it with a 3.0L crank, then you get 3.3L, and if you build it with a 3.2L crank, then you get 3.5L


The pistons are Max Moritz style. These are made to go with 3.0L crank and rods, if you want to build a 3.5L out of the setup, then you would need new pistons.

The Pistons and cylinders have been measured and are in great shape.

The cylinders are 3.2 style that have been D cut. The cylinders have less than .015mm taper and less than .007mm roundness (factory max is .040mm)

The case is in great shape except for a few broken head studs.

I am looking for $1950 for the pistons, cylinders, and case.

I also have a set of heads that have been ported with larger ports and valves that are chamfered to work with this setup too for $500 more.

Thanks

Ed

[edbaus]

Bump

Thanks

Ed

[edbaus]

Bump

Thanks

Ed