Parting out 1984 911 targa with G50

[pc100porsche]

Gravel Pan -- ie Metal Cover for Steering Rack / Fuel Pump ?
External Mirror Glass ?

[BeauBlues]

Originally Posted by pc100porsche

Gravel Pan -- ie Metal Cover for Steering Rack / Fuel Pump ?
External Mirror Glass ?

I sent you a pm about the steering rack pan. Are you still interested?

[anguish]

Im looking for the small pieces that go behind the bellows of the front bumper in front of the fenders. Need both left and right sides.

Angus

[blee]

In need of passenger-side door hinge post - lower half. Did this part survive the crash?

[DW SD]

was the fuel tank destroyed in the crash?
If not, how much for the tank? local pickup

Doug

[millarg]

Do you have the fresh air blower?

[radobard]

Have you sold the fuel tank and fuel lines? If not, how much do you want for them.


Roland
847-494-2441

[BeauBlues]

Fuel tank is stuck in the car. There is a lot of cutting involved to get it out. I don't even know if it's worth my time for how much it's worth. I'm still not 100% sure it survived.

[Paatatt]

Hi,

would you have the dashboard front fascia still available?

Centerpiece (red in the picture below) as well as the left side part interesting.

Thanks,

[oistein]

Hello !
Thankd for answer .
Can you send pictures of the fenders from the inside ?

Email: isteindsn1@gmail.com

This is what I need:
Attachment area for fender to body, along the hood.
Upper stiffner plate area
Doesen't matter if bent, I can straigthen it out, as long as the metal is "fresh"
See picture.


Regards Řistein

[BeauBlues]

Originally Posted by Paatatt

Hi,

would you have the dashboard front fascia still available?

Centerpiece (red in the picture below) as well as the left side part interesting.

Thanks,

I just checked this piece. It was not in good shape. It crumbled when I tried to remove it.

Originally Posted by oistein

Hello !
Thankd for answer .
Can you send pictures of the fenders from the inside ?

Email: isteindsn1@gmail.com

This is what I need:
Attachment area for fender to body, along the hood.
Upper stiffner plate area
Doesen't matter if bent, I can straigthen it out, as long as the metal is "fresh"
See picture.


Regards Řistein

I haven't looked at that section today. I did do extensive cutting in that area to remove other things. Did you need that piece to be the full length of the fender? If so, I might have cut it already. Although I'm not 100% sure about that. I'll try to check it out tomorrow.

[Paatatt]

OK, thanks for checking the dash front.

[hawaiipcar]

pm sent on oil thermostat

[oistein]

Originally Posted by BeauBlues

I just checked this piece. It was not in good shape. It crumbled when I tried to remove it.



I haven't looked at that section today. I did do extensive cutting in that area to remove other things. Did you need that piece to be the full length of the fender? If so, I might have cut it already. Although I'm not 100% sure about that. I'll try to check it out tomorrow.

Dont need full length ,half if possible.
What about the upper part (both sides) of the inside stiffner plt ?

Regards Řistein

[victatwin]

Hi Beau, looking for Targa Top seals (If still good),rear Roll bar seal, front windscreen seal and the side seals,basically every thing to seal the T Top to the car.
Regards Brett L in Australia.

[victatwin]

Bump

[911pcars]

Are these areas still intact (both sides)? If so, interested.



Sherwood

[BeauBlues]

Hi Beau, looking for Targa Top seals (If still good),rear Roll bar seal, front windscreen seal and the side seals,basically every thing to seal the T Top to the car.

Regards Brett L in Australia.

Targa top seals were not in good condition. I'm pretty sure I got rid of them too. Sorry.

[BeauBlues]

Are these areas still intact (both sides)? If so, interested.







Sherwood

Someone already took those sections. Sorry if I haven't updated the front page. I'll try to update it soon, as I am running out of parts to sell.

[sweet911]

Are the rear bumper shocks still available. If so how much?
Regards
Joe