930 parts for sale - part 1

[mrm930]

Clearing out my garage of some extra pieces after modifying my 78 930.

Some of these parts were installed on the car almost 15 years ago, but never finished the restoration due to an extensive remodel of a house that we just purchased. Fast forward to 2 years ago - took the car down to the tub and electrical harnesses. Extensive mods through-out. So alot of these parts were new then, but the car never was drivable and the engine ran for about 15 minutes or so.

Some of the parts are from my first turbo, a 1976 930. So these could be nice for someone if they need to restore the car back to original. Obviously, I wish I still had that car.

If interested, please send me a pm or send me an email at mmadsen@designerwoods.com. All costs do not included shipping or packaging.

Thanks for looking

Air Cleaner: $425.00



OEM intercooler: $75.00



Adjustable Spring Plate: OEM 1978 930: $175.00 for both


Spring Plate: OEM 1976 930: $110.00 for both


Exhaust manifold with heat exchangers: OEM 1976 930: $315.00 each
Cross-over pipe: OEM 1976 930: $240.00
These were media blasted and are still fresh. The bottoms have the ususal dents from previous work not being done very carefully. If someone was good at welding, you could drill out the spot welds and remove the dents - then re-weld it and grind it smooth.



Heater Hose: NOS: $35.00
This is about 4'0" long. Will fit locations from the heat exchanger to the engine and from the heat exchanger to the heat control boxes

[stallone]

Sent email and pm on air cleaner.
--mike

[mrm930]

Clearing out my garage of some extra pieces after modifying my 78 930.

Some of these parts were installed on the car almost 15 years ago, but never finished the restoration due to an extensive remodel of a house that we just purchased. Fast forward to 2 years ago - took the car down to the tub and electrical harnesses. Extensive mods through-out. So alot of these parts were new then, but the car never was drivable and the engine ran for about 15 minutes or so.

Some of the parts are from my first turbo, a 1976 930. So these could be nice for someone if they need to restore the car back to original. Obviously, I wish I still had that car.

If interested, please send me a pm or send me an email at mmadsen@designerwoods.com. All costs do not included shipping or packaging.

Thanks for looking

OEM Turbo: 1976 930: $325.00 (perfect for original restoration)
OEM Turbo/exhaust bracket: $35.00
The bracket was media blasted and powder coated in satin black





OEM Front Torsion Bars: $45.00/pair (19mm diameter)


Turbo Oil Feed hardline: $32.00
Turbo Oil Catch resevior: $50.00


Rear bumper Turbo heat shield: $48.00


OEM Main Battery ground strap: $8.00


Brake booster body: $18.00


Turbo tie rod ends: $50.00 for both
Front torsion bar change lever: $48.00 for both

[Bergo]

I'll take the intercooler

edit: and the turbo bracket. PM'd and e-mailed you.

[oz 930 turbo]

2nd in line for intercooler,thanks

[mrm930]

Clearing out my garage of some extra pieces after modifying my 78 930.

Some of these parts were installed on the car almost 15 years ago, but never finished the restoration due to an extensive remodel of a house that we just purchased. Fast forward to 2 years ago - took the car down to the tub and electrical harnesses. Extensive mods through-out. So alot of these parts were new then, but the car never was drivable and the engine ran for about 15 minutes or so.

Some of the parts are from my first turbo, a 1976 930. So these could be nice for someone if they need to restore the car back to original. Obviously, I wish I still had that car.

If interested, please send me a pm or send me an email at mmadsen@designerwoods.com. All costs do not included shipping or packaging.

Thanks for looking

OEM Phenolic injector blocks (machined out to mm) $60.00 for all
OEM door latches: $45.00/pair (good condition - the acrylic inserts are discolored and have some cracks, but still work)


Torsion Bar plate cover: $30.00/pair (media blasted and powder coated clear)
Front A-arm brackets: $25.00 for all 4 pieces (media blated and powder coated gloss blk)
Sway Bar Brackets: $8.00 for both
Rear flare fender bracket: $10.00
OEM Flywheel bolts: $8.00 for 9 total bolts


Muffler Bracket: $20.00 (media blasted and powder coated satin black)


OEM Turbo Shifter lever and shif coupler brackets: (needs new bushings) $62.00 for all
OEM Shift boot: $10.00 (no rips or tears - near perfect condition)


Pedal Set: $95.00
NOS AJ/USA aluminum pedals with rubber inserts. Complete with screws and original box


Flag Mirror bra: $22.00/pair (very good condition - close to new)


Evaportor A/C housing with fan motor and fan mount: $175.00
small chip in the corner as shown in the picture. Fan motor works. I will also include an extra motor that I have.



A/C switching and wire harness: $

[mrm930]

The phenolic injector blocks were machined to increase the bore from 32mm to 36mm. These OEM blocks do not have any cracks or splits. In very good condition

Thanks again,
Mark

[lite75]

I'll take all of 76 exhaust parts, exchangers and crossover pipe. Pm sent

[ELZ's930]

I'll take the ground strap please.

Leonard

pm on the way

[green4oo]

PM sent on mirror bras.

[oliverkoepcke]

should you still have the mirror bras I would take them

[solid lifters]

I'll take the torsion bar covers and the shifter parts including the boot, pm sent

[mrm930]

Thanks everyone for the great response. I have answered all pms and getting more shipping costs to some. I should have answers to everyone by tomorrow.

If any other questions - email me - I can answer more quickly. I usually do not get on this site until the evening. I will post sold items within the next few days

thanks again,
mark

[jonmont]

I'll take the rear bumper heat shield please. PM sent.

[kenikh]

Drip can and line for me please

[Tom F2]

Put me in line for the turbo bracket, please.

[Robbbyg]

Second in line for Heat shield and Turbo bracket please

[jmrc]

I'll take the
Front A-arm brackets: $25.00 for all 4 pieces (media blated and powder coated gloss blk)
Sway Bar Brackets: $8.00 for both

[kgieg]

I would like the heater hose. Thanks

[Ron20086]

PM sent on heater hose.