Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/index.php)
-   Porsche 914 & 914-6 Technical Forum (http://forums.pelicanparts.com/forumdisplay.php?f=7)
-   -   V8 conversion help? (http://forums.pelicanparts.com/showthread.php?t=160391)

skline 04-27-2004 04:01 PM

V8 conversion help?
 
Anyone in Orange county or south LA county want to help me get my car going? I am doing a V-8 conversion on a 914 Chalon conversion. I should have the parts by the end of the week but I have so much to do. Anyone with V-8 conversion knowledge would be greatly appreciated. I can supply beer and food too. As for what needs to be done, I need to install the front and rear sway bars, finish the 5 lug conversion front and rear, cut out the front for the radiator and run the plumbing, configure the engine and trans together with the accessories, and install it. Then I can finish the body work and hopefully at least get it primered for the WCC. So any help would be greatly appreciated.

peter carroll 04-27-2004 07:11 PM

So if anyone has an extra 1000 hours on their hands, please let him know. Thanks

skline 04-28-2004 07:01 AM

I could do it myself in less than 1000 hours. In fact, I will. I have helped others with their projects, so I thought I would ask for some in return. I will get it done. Thanks anyway.

Scooter311 04-28-2004 07:40 AM

Dood if I lived closer I'd be all over that - I was thinking of putting an 8 in mine, and have already done a lot of what you're gonna do....
Gud luck!
Jeff


All times are GMT -8. The time now is 08:58 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.