![]() |
Anyone have acceleration numbers for their teener?
0 to 60 mph and 1/4 mile times for all the fours, sixes, turbos, V8s, Subaru motors, rotaries and what have you? Someone must have a G-tech Pro or similar to measure these numbers ...
|
914-8's haven't changed much since the 1st one built by Porsche in about 1970; they typically run 0 to 60 in under 5 sec and do the 1/4 in under 13 sec. Typical 914-8 is 2340 lbs / 300 hp = 7.8 lbs per hp ( Z06 Corvette is 7.9 lbs / HP )
|
I don't have any times, but in the standing starts at the Mexican races, I get trounced in 1st gear with my trusty 'ol 901 tranny but I can out accelerate a 68 camario with a 355 small block in 2nd to 4th gears!
|
According to the owner's manual for my 1970 914-6, it will go to 60 in about 8.5 sec and do the 1/4 mile in about 17 sec. It has a power to weight ratio of about 17.8 lbs per HP ( 2075 lbs / 125 HP ).
Not quite as fast as my 914-8 which is just about 2x as fast !!! |
Propricer, I just noticed you have a whole stable of 914s!
|
Alfred, if you have access to any owner's manuals (and I'm guessing you do!) there should be performance data in them.
--DD |
0-60 in 4.5 with secondaries closed on 205 65 15 crappy tires
|
Hey Sean .... is that time starting off in second? Speaking of crappy tires, I'm saying adios to my Rivieras and dinky 195-50s. My brother-in-law gave me a nice set of Fuchs, 2 6x16 and 2 5.5x15. 5 lug conversion is underway.
|
Quote:
How did you get these numbers? I've got a G-TECH meter and have got some numbers from it. I didn't want to post them because they are too good I'm afraid everyone will throw up the BS flag. Bob |
Quote:
|
met a guy with a turbo'd CRX, he had a G-tech. Dont be shy....post those numbers. anyone who thows up teh BS flag better have a v8 car.
Alfred, now I think I know what he was doing with it. he kept turning it sideways and pushing buttons. He did not let me play with it though. Guy, post your numbers!!! when I first started driving my car, it was scarry fast. Now, It feeels slow. I think I need more HP |
Quote:
|
| All times are GMT -8. The time now is 06:32 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website