Cam recommendation for 2.4/4

[racertimc]

Hi, resealing my engine, found my cam is bad, it was a Stamos Grind 021HV-7, 276 duration with 383 lift, was also marked with Cal Cam, probably a regrind.

I liked the way the car drove, strong bottom end, which is probably good with those big pistons.

Anyone have some advice/experience. This is a street car driven by any old man, racing/autocross no more.

Has Dellortos 45, 1 5/8 header, no heat exchangers, stock ignition(so far).

Cheers
Tim