REALRIDE RACING House Cleaning

[RealRideRacing]

We've just SOLD the RealRide Racing na944 Race Car and we're also in the process of cleaning up the old shop and getting ready to move to a new one. Over the years, we've collected tons of parts from building and racing our 944's. Now that we're preparing to move into Professional Touring Car Racing, we have to make room for new parts. It's time to Clean House! Here's a list of parts we have to get rid of, most of them don't have prices yet since we're just uncovering the layers of boxes. I'll post what we have to get rid of for now, prices to follow:

- DESIGN 90 forged alloy Porsche factory wheels with tires. 8jx16" (actually 9" wide) Front & Rear wheels with Goodyear GSCS DOT R Race tires (255/50x16) with 50% tread. $800 for the entire set.
- Porsche 944 Tail light lenses $60/pr
- Porsche 944 S2 Bell housing, ring gear, flywheel: Make a reasonable offer
- '87 Porsche 944S Intake manifold, DME, Wire harness, throttle body: Make a reasonable offer
- '87 Porsche 944S Airflow meter: Make a reasonable offer
- '87 Porsche 944S Dash Gauge Pod (includes all the gauges): Make a reasonable offer
- Porsche 944 aluminium jack and handle: Make a reasonable offer
- Porsche 944S2 Mahle Air Filter (the long skinny one). Never used, still in the box: Make a reasonable offer
- '87 Porsche 944S factory Coil Springs: Make a reasonable offer

Buyer is responsible for shipping fees.

That's just what I found by pulling out the first layer of crates tonight. There's also a 944 turbo cylinder head somewhere there, but it needs a rebuild. I also found several crates full of hoses, belts, all kinds of valves, CV joints, ...etc.
Maybe what I should do with all the small parts is put them all in a crate and just sell it in bulk. Any Porsche Repair shops interested? I'll post more as I dig them up.

Regards,
David
REALRIDE RACING http://www.RealRide.com
(Visit our Discussion Board for Racing Enthusiasts)

[scottewid]

If you come across a complete fuel rail that will fit 1984 na, pls. let me know.

[1.2gees]

Hold on, hold on, hold on!!!

You're still gonna race 944s right?
Ahmet

------------------
It's all the driver...

[Obin Robinson]

there's a long list of stuff i'm looking for, the short list is:

what do you have that will fit a 1984 NA 944?

thanks!

obin

[RealRideRacing]

Obin,
I don't have that many parts left for an '84 944.
A complete Rear Suspension Sub-Assembly (Stub Axle, Steel Trailing Arms, Hubs, 23mm Torsion Bars)
Tail Light Lenses
Box of assorted Brake Pads (new & used) ranging from Pagids to Metal Masters
I'll see what else surfaces as I dig through the boxes next week. We'll be at the Track this weekend.

Ahmet,
At this moment, we're down to the one 944 Turbo. We need to clear cars out to prepare for our new Race Car project. The new shop will have the New Car, the 944 Turbo, 2 Mazda RX-7 Turbo's and hopefully, we'll be selling the RX-2 as well. Then outside, we'll have a Transporter, a Motorcoach and two open trailers. Believe me, the biggest shop we can afford will still be packed.

Regards,
David
REALRIDE RACING www.RealRide.com
(Visit our Discussion Board for Racing Enthusiasts)

[nizzmo]

you wouldn't happen to have a flexplate do you?probably not , but it never hurts to ask