|
|
|
|
| Author |
|
|
Registered
|
Hurry..need part number.cat.converter
I need some quick help in locating a part number for an aftermarket cat converter..I had a magnaflow on there and it burnt up and blew out the exhaust..I know I had the mixture was set too rich and ran like that for a year..anyways the muffler shop told me I neede to find a cat with at least a 16-18 inch brick inside the housing. Please help need to do this tomorrow
|
||
06-07-2005, 06:48 PM
|
|
|
Registered
Join Date: May 2001
Location: Markham, Ontario, Canada
Posts: 429
|
Re: Hurry..need part number.cat.converter
Quote:
My CAT was not clogged it was burnt out and stopped working, when I replaced it the shop installed a Catco model for a V6. It allowed me to pass smog tests and there was NO loss of performance and the price was like $60CA plus installation. Quote:
The original Porsche CAT only had a CAT section (brick) a few inches in length similar to the aftermarket replacements the rest of the housing was a large resonator. Ask me how I know.
__________________
Mark '86 944NA '10 VW Golf 2.5 5sp '99 BMW 540i Sport Wagon Last edited by mlue; 06-07-2005 at 07:09 PM.. |
||
|
06-07-2005, 07:04 PM
|
|
|
Registered
|
Yes mlue is correct, You can also just get a universal cat with a 2.25 dia for like $150
__________________
1986 951, Stock for now. ]87 924S Gaurds red- SOLD after 11 years of ownership |
||
|
06-07-2005, 07:14 PM
|
|
|
Registered
|
Thanks guys...I think my mixture was too rich and burned out the first I had ( magnaflow)..so I think I'll try it again....now to find one
__________________
Beer Cigars and a 10mm socket... |
||
|
06-07-2005, 07:26 PM
|
|
|
Registered
|
so 2.25 is the correct tube dia. found some magnaflow cats for $53.75 at www.justmagnaflow.com
__________________
Beer Cigars and a 10mm socket... |
||
|
06-07-2005, 07:44 PM
|
|
Porsche 944
1987 Porsche 924S 2.5 modified
