|
|
|
|
|
|
Registered
Join Date: May 2002
Location: Tioga Co.
Posts: 5,942
|
Hatch repair
I'm trying to reseal my hatch glass. Does anyone who has done this have any tips for separating the glass from the frame. I'm using a scraper and it is a very slow process. If anyone has any suggestions, I'm very open.
__________________
'86na, 5-spd, turbo front brakes, bad paint, poor turbo nose bolt-on, early sunroof switch set-up that doesn't work. Malo periculosam, libertatem quam quietam servitutem. |
||
|
|
|
|
Registered
Join Date: May 2004
Location: Brandon FL
Posts: 371
|
continue using the scraper, just keep it sharp. It took me a full day to seperate mine, and a few hours to get all the old glue off the frame. I used wooden clothes pin halves as wedges between the frame ans the glass.
__________________
Rick 99 996C4 06 525XI 87 944S - Sold 77 924 - Sold |
||
|
|
|
|
Registered
|
did you happen to get a spare hatch hinge in the deal?
__________________
*Disclaimer: The person above is actually dumber than he appears. my web site Torque values maintainance and repairs lots of my rebuild pics weights and measurements '84 944 auto/ps/ac/cc '86 951 Providing ignorance one post at a time. |
||
|
|
|
|
Registered
Join Date: May 2002
Location: Tioga Co.
Posts: 5,942
|
You bet, PM me.
__________________
'86na, 5-spd, turbo front brakes, bad paint, poor turbo nose bolt-on, early sunroof switch set-up that doesn't work. Malo periculosam, libertatem quam quietam servitutem. |
||
|
|
|
|
Registered
Join Date: Jun 2002
Location: North Idaho
Posts: 162
|
Todwic,
Good info on your site. Thanks. Harvey
__________________
'94 968 Coupe, 6-speed '88 928 S4, 5-speed '85 928 S, 5-speed (Sold) '02 Audi TT Turbo, 6 speed (Sold) |
||
|
|
|
|
Registered
|
Quote:
__________________
*Disclaimer: The person above is actually dumber than he appears. my web site Torque values maintainance and repairs lots of my rebuild pics weights and measurements '84 944 auto/ps/ac/cc '86 951 Providing ignorance one post at a time. |
||
|
|
|