question - my aftermarket 951 exhaust setup.

[rkp951]

Hi,

I was wondering if anybody on here could offer some advice for somebody who isn't too knowledgeable about exhaust systems..

This is the current 3" setup on the car, which came this way from the PO. (I have only removed the cat). it was a jdm car, and I don't know who manufactured it.

I love the system (it performs/sounds amazingly), but my only issue is with my ground clearance, and if there is anything I can do to the section of exhaust which hangs roughly 2" below my oil pan.

I want to retain as much of it as possible, and am looking for advice as to what I would need (brands/links would be nice) around the downpipe/wastegate to raise everything higher back into the cutouts on the car's underside.

Would it even be a good option to get something custom fabricated?

I am just looking to prevent any deadly ground contact, as things can get pretty hairy..

Thanks for the help!

[krystar]

for the love of god, please don't get under the car with a scissors jack holding the car up.

[rkp951]

I wasn't under the car in any way.. I set my camera's timer and rolled it under^

Thanks for the dose of common sense though..