Need help valuing some 924 GTR parts?

[Matt Monson]

Hello,

I've got some NOS 924 GTR parts that I want to sell but don't have a clue how to value them. The only place I can find any of these parts for sale is Freisinger. Any help pointing me to a 924 GTR expert stateside would be appreciated. Or an owner who might want the whole pile of stuff.

I have rods, rod bearings, main bearing, pullies and several rev limiters (with 935 part numbers).

Thanks in advance.

Matt

[ernie9944]

Originally Posted by Matt Monson

Hello,

I've got some NOS 924 GTR parts that I want to sell but don't have a clue how to value them. The only place I can find any of these parts for sale is Freisinger. Any help pointing me to a 924 GTR expert stateside would be appreciated. Or an owner who might want the whole pile of stuff.

I have rods, rod bearings, main bearing, pullies and several rev limiters (with 935 part numbers).

Thanks in advance.

Matt

You could try this guy m2.facebook.com/ideola

[333pg333]

Might be worth speaking with this guy who is building an amazing (mostly) replica.

924 GTP - 944 LM re-creation - Rennlist Discussion Forums

[Matt Monson]

Originally Posted by 333pg333

Might be worth speaking with this guy who is building an amazing (mostly) replica.

924 GTP - 944 LM re-creation - Rennlist Discussion Forums

Thanks for the lead, but unfortunately the GTP was the first use of the 944 engine. The GTR used the 2.0l turbo 924 engine. The parts I have are definitely 924 based.

[Matt Monson]

Originally Posted by ernie9944

You could try this guy m2.facebook.com/ideola

Ideola's homepage says they are closed until further notice.

[grendiers]

If you have part numbers, you can cross reference the rod and main bearings on PET. If they are the same as stock bearings, then not worth much. Those bearings are currently available from EBS Racing.

[Matt Monson]

Originally Posted by grendiers

If you have part numbers, you can cross reference the rod and main bearings on PET. If they are the same as stock bearings, then not worth much. Those bearings are currently available from EBS Racing.

They aren't in PET. The only place I can find them, since I don't have a GTR parts manual, is for sale by Manfred Freisinger.

[grendiers]

Fun reading for ya: 924Board.org :: View topic - 924 Carrera GT Le Mans, 924GTP & 924S Turbo

Also, look for TJC on the 924 board, he probably can help.

[333pg333]

This sort of build is more popular in Germany and possibly the UK. I have seen a few similar builds on forums there. If you're desperate I could look around for you.

[Matt Monson]

Desperate, no. More interested in finding someone who owns a real one and may need or want some spares.

I can find the top of the market if I contact Friesinger. I would sell this stuff for much less to an owner.

But thank you for the offer.

[emoore924]

Reach out to Peter Dawe in Stroudsburg, PA