|
|
|
|
| Author |
|
|
Registered
Join Date: Dec 2002
Location: Kentucky
Posts: 447
|
Would anyone be interested in a $500-$700 rear Koni Coil Over setup
I am talking to koni and a few other people working on piecing together an adjustable coil over kit that will bolt on to the rear of our 944s. So far I can make a kit that is single adjustable Koni with Hypercoil springs for $630 not including taxes or shipping. The kit would include two coil over Koni adjustable shocks, Racers Edge lower shock adapter, and up to 400# Hypercoil springs but 350#s is the recommendation. Oh you can add about $250 to make the shocks double adjustable. I'm gonna do this for sure!!!!!!!!! What do you guys think?
__________________
1986 951 1983 944 |
||
02-20-2003, 09:10 AM
|
|
|
Registered
Join Date: Dec 2002
Location: Kentucky
Posts: 447
|
I might be wrong on the spring rates. I was told I could use "up to 400# springs" any spring rate below that will work correctly.
__________________
1986 951 1983 944 |
||
|
02-20-2003, 11:08 AM
|
|
|
Registered
Join Date: May 2001
Location: LI NY
Posts: 1,689
|
sounds SICk..i may be interested in the summer...thsi and the rollcage..would be nice litel upgrades...
__________________
82' 911 SC"Go Go Green" 87'3.2L,Turbo Brakes,Brake Bias Valve,Fiberglass Front Clip, 16" BBS, Multiple Strut Braces, Re-valved Bilstiens and a few more "Stock" additions. SOLD  04' Audi A4 Avant Quattro S-line- RS6 look alike with half the HP  http://www.eurocompulsion.net |
||
|
02-20-2003, 12:22 PM
|
|
|
Registered
Join Date: Dec 2002
Location: Kentucky
Posts: 447
|
It will be early summer before I can do this myself but I will help anyone out on this board if you are interested.
__________________
1986 951 1983 944 |
||
|
02-20-2003, 12:39 PM
|
|
|
Registered
Join Date: May 2001
Posts: 49
|
Huntley has a nice setup.....I paid $872 shipped for everything. I researched putting it together myself but decided a PROVEN setup would be a less risky proposition.
|
||
|
02-22-2003, 05:46 AM
|
|
|
Registered
Join Date: Dec 2002
Location: Kentucky
Posts: 447
|
Those look pretty nice!! I talked with Paragon Products and they are going to test the setup that I proposed. If it works out ok they will probably be selling the setup. My guess is the kit would be around $600-$700 for double adjustable.
__________________
1986 951 1983 944 |
||
|
02-22-2003, 06:08 AM
|
|
|
