![]() |
FS LSD + custom trans cooler setup
*SOLD*
Up for sale is a good LSD, and custom transmission cooler setup. The LSD and cooler drive parts are from a 5R transmission from my V8 swapped 944. On a routine trans fluid change, I found some metal shavings, and on investigation, found the input shaft bearing was going. The trans did not blow, but is not fixable, so I am parting it out. The LSD hooked up well, keeping my LSD from cooking tires. I developed my own oil cooler setup for the new AOR trans, and had an extra oil cooler, so I am including a full cooler setup, minus only the AN lines. I had custom fittings machined (from AN-8 male to male fittings) to adapt the factory cooler pump to AN-8 lines. Add your AN lines to the Setrab cooler included, and you will have duplicated the setup I have on my racecar now. The Setrab cooler is lightly used, but clean, and was *not* on the car with the old trans (I had the factory cooler loop then). Parts list: -LSD with good Turbo ring gear, and cooler drive gear attached -2 newly machined, custom adaptors for the factory cooler. -Transmission side cover with factory cooler pump -Transmission rear cover with cool oil return -Setrab oil cooler. with AN-8 adaptors. Add AN-8 lines and fittings of the right length, and you have a complete, effective cooler setup along with a solid LSD $650 + shipping. https://sterlingdoc.smugmug.com/Othe...IMG_0251-L.jpg |
pm'd
|
Sold in minutes!
|
All times are GMT -8. The time now is 07:45 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website