Parting out blue 1982 5spd. Nearly Complete

[BrendanC]

(Edit - added clutch stuff and others 2/17)

I have a complete car sans Drivetrain. Everything else down to the keys is there. Well, no Radiator. I will use that.

Even the power steering wasn't unhooked. AC is still intact and it worked before I unbolted it from the pulled engine.


What I have decided to do is move the 78 project forward and fast forward. Use everything I have NOW to put it together and run it. Now.

So I will run the nearly done 4.5L from the 82 and the 78 transaxle that was already in it. Big Brakes, Konis, Hypercoils, etc. I'll install all the best parts I have now and run with it. Have fun. Have a car I am 100% happy with.


So I guess the question is - does anyone need a fully usable car with no engine/TT/Trans? It needs paint. But it has okay 18s on it, and several new parts installed. And its Smogged and registered in CA until July. Well the smog is for 2 years from September I think. 1500 dollars would be great, but I will accept offers. Just wondering.

(EDIT) - Now parting it out.

Steering wheel and front wheels are staying with me

[BrendanC]

Instrument cluster and front spoiler are gone.

[Danglerb]

Disassembleritis strikes again.






Don't forget to post on the SoCal forum.

[BrendanC]

Well, its not disassembled yet.

[MPDano]

Sure wish I had the cash, especially since your local. Anyways, might as well ask and drool. Whatcha asking for the Borla set up?

[BrendanC]

Couple hundred dollars would do. Around 250-300 I think its reasonable. 350 if you make me clean it.

I deliver locally.

[BrendanC]

I could throw in a nice Cat-Y pipe from the car as well if yours is iffy because it was butchers in the euro-federalization. Cat works flalessly. Consider it a free gift with purchase.

[BrendanC]

A new borla is 595, so I think 250 is good for this one. No need to get greedy.

[tedward515]

I might be interested in the center armrest between the front seats and the one between the rears if its the storage locker type. Also if it isn't to banged up maybe the front engine under-tray. Let me know. Thanks

Eddie

[BrendanC]

The center one at the back is just a hump. Sorry.

The under tray isn't TOO bad. Kind of large to ship though. I can take some pics this weekend.

The center armrest I am hesitent to sell. I may need it.

[MPDano]

Originally Posted by BrendanC

I could throw in a nice Cat-Y pipe from the car as well if yours is iffy because it was butchers in the euro-federalization. Cat works flalessly. Consider it a free gift with purchase.

Is this from the exhaust manifold back?

[BrendanC]

Correct. I think I threw out the cast iron manifolds. So Manifold back.

[BrendanC]

Dash is for sale
Center console (nice, leather) for sale
pod, pod knobs, etc.

[sonett3]

Ill buy the momo sterring wheel.

[BrendanC]

It was red on the leather part, and then made with leather paint. Still interested?

[BrendanC]

Some additions:

I have some more/better pics to put up now.



L-Jet flywheel - very little use really. No ridge at all on wear surface. 220 dollars.

80-86 Clutch system - very little wear. Recently replaced. Includes:
Pressure plate
Clutch disks
intermediate plate
Short Shaft
guide tube
Throw out bearing


From 928intle. Kits are 800 and intermediates are an additional 600. Used they are 400.

Everything in the clutch system for 600. See pictures. I'll throw in a very lightly used slave cylinder.

Front Seats - 75 for each seat.
















Prices are somewhat negotiable. Shipping isn't too bad because I have a fedex account.

[MPDano]

Sent PM

[BrendanC]

MP Dano came by and got his parts off the car without much fuss. I wasn't going to touch some of it, so he did well.

[MPDano]

Thanks Brenden for hooking me up with some extras. My Euro 928 loves you man

[usfromflorida]

Do you have the condenser, how much, you could ship it with my other parts.
Mark