|
|
|
|
| Author |
|
|
Registered
Join Date: Mar 2010
Posts: 16
|
Mystery ignition switch pieces
Hi, am new to the board. Currently restoring a Euro 928 1991 S4. About 90% there! I have a problem with ignition switch assembly and am replacing the barrel, cam and electrical switch. On taking the cam out there was left a small plastic paddle and small spring in the housing. I cannot see how it fits into the mechanism?? The paddle and spring came from the cam/elect switch side rather than the barrel side. Any help would be appreciated!!
steve |
||
05-08-2010, 06:48 AM
|
|
|
Registered
|
Do you have an illustrated breakdown of the assembly to work from?
__________________
1982 Porsche 928, Auto, 4.5 http://i72.photobucket.com/albums/i166/hethaerto/928Mist2.jpg?t=1305333945 |
||
|
05-08-2010, 06:59 AM
|
|
|
Registered
Join Date: Mar 2010
Posts: 16
|
 Have attached a photo ( taken from another forum). It shows the two unidentified pieces, a small plastic 'paddle' and spring. Also shown in pic is the cam for size comparison regards Steve |
||
|
05-08-2010, 08:14 AM
|
|
|
Registered
Join Date: Mar 2010
Posts: 16
|
Hi, no mention of these two pieces in detailed drawings of the ignition assembly either
regards Steve |
||
|
05-09-2010, 03:45 AM
|
|
 |
|
|
| Tags |
| ignition switch replace |
Risky Bidness
