|
|
|
|
| Author |
|
|
Registered
|
Where do you guys mount your harnesses?
as some of you know... i have plans to rip out my interior, repair the dash and center console, roll bed-liner everywhere for soundproofing and better looks, put in a roll cage, racing seats (Bride lowmax's or Corbeau sportster CS's), and Schroth Clubman harness.
my question is, where do you guys mount the lap and crotch belts? Obviously the shoulder belts will be wrapped around the cage at the proper angle.
__________________
1982 928S euro M28/11 That criminal under the hood is a really bad influence on me: "hey...what about another 1000 rpm? And you know, we're doing 75...but I can go 100 and you'll hear my beautiful voice a lot better! Lets go baby..." dammit! I'm such a slut~ N! -Normy |
||
05-08-2012, 06:20 PM
|
|
|
Registered User
|
You can do 2 things. Drill holes in the floor and do the backer plate and eyebolt route (sold at most raceshops), or you can fab a bar that mounts beween the front seat hold downs using the bolts that bolt the seat down. It basically will side between the floor and slider and the bolt will clamp it all together.. wrap the strap around that
__________________
1979 928 85 Euro 2v motor,S4 Brakes and suspension, 1988 951 street legal track car(sold) Neon SRT4 track car |
||
|
05-08-2012, 06:34 PM
|
|
1988 Porsche 951
