Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/index.php)
-   Porsche Marketplace Discussion (http://forums.pelicanparts.com/forumdisplay.php?f=268)
-   -   Another 930 conversion, worth 25k? (http://forums.pelicanparts.com/showthread.php?t=820388)

Farintosh 07-12-2014 12:46 PM

Another 930 conversion, worth 25k?
 
Hey everyone!

Another 930 conversion has caught my eye and my heart. This one was done in 87' in California with an 85 car and an 87 engine.

Engine seems to be in great shape, no rust, 5-speed 915 transmission, really nice interior... has some issues though.

http://i.ebayimg.com/00/s/NzY0WDEwMj...TvrT3/$_20.JPG

http://i.ebayimg.com/00/s/NzY0WDEwMj...TvrTz/$_20.JPG

First one is these odd paint cracks. Wide body is all steel apparently and passed the magnet test but it looks like there might be a thin layer of pale yellow putty used smooth them out which has cause the paint to crack from expanding and contracting over the years? Just my guess, wondered if anyone has seen anything like it and if its a nightmare (I'll post a better picture later, forgot my dslr cable)

http://i.ebayimg.com/00/s/NzY0WDEwMj...TvrTu/$_20.JPG

There are a few of these cracks around the car and it some small body issues; gasket seal on the taillights is completely dried out, hood strut doesn't work, side skirt edges rough, and a million paint chips.

There is also a small oil leak, not from the engine but on a pipe by the rear passenger fender. Doesn't look too serious but I'm not well versed in these cars.

I figure I can paint and fix most of the small defects if the engine and everything looks good from a ppi. I have some much better pictures I took this morning I'll post later this evening.

So my question is: what do you think this car is worth? A Frankenstein mash-up looking to be an on going nightmare? or an affordable 930 which could be polished (heavily) into a real gem.

Thanks ever so much for your time!

christiandk 07-12-2014 01:13 PM

Looks pretty nice to me. I cant tell from the pics that it is not a 930. What engine is in it, what about the brakes, suspension and interior parts?

Farintosh 07-12-2014 01:34 PM

Quote:

Originally Posted by christiandk (Post 8160808)
Looks pretty nice to me. I cant tell from the pics that it is not a 930. What engine is in it, what about the brakes, suspension and interior parts?

Engine is from an 87' 930, has proper vin # and all. Not sure about the rest. Brakes looked good and felt great as well as suspension. Interior has newer seats in great shape, dash was a bit beat up, no a/c but clean overall.

http://i.ebayimg.com/00/s/NzY0WDEwMj...TvrUB/$_20.JPG

http://i.ebayimg.com/00/s/NzY0WDEwMj...TvrT2/$_20.JPG

http://i.ebayimg.com/00/s/NzY0WDEwMj...TvrUD/$_20.JPG

christiandk 07-12-2014 01:48 PM

Ok, what I meant was - are the susp and brakes turbo parts. From what you describe it sounds like a pretty good deal if checks out.

NYNick 07-12-2014 01:53 PM

Are those cracks only near the flares? Could be a bad weld job and seams covered up with bondo.

Farintosh 07-12-2014 01:56 PM

I'm not sure if they're turbo parts are not; the seller seems to know nothing about the car.

And yes, the actual cracks are around the fenders. Is this a big issue if I wanted to repaint?

plumber 07-12-2014 07:28 PM

I talked to the seller he said he bought the car from his neighbour and was converted in California back in the day.
Maybe the seller could put you in contact with his neighbour and has more info on the build.

Farintosh 07-12-2014 08:00 PM

.
.

Farintosh 07-12-2014 08:01 PM

Quote:

Originally Posted by plumber (Post 8161243)
I talked to the seller he said he bought the car from his neighbour and was converted in California back in the day.
Maybe the seller could put you in contact with his neighbour and has more info on the build.


The owner who brought it up here is in the military and really only around a couple weeks each year so apparently I can't get a hold of him. Are you going to snatch this one up too plumber? haha

plumber 07-13-2014 06:09 AM

another car
 
Too many horses in the barn already.
If your thinking of buying and are going to look again I could offer my 2 cents.
Let me know I could meet you there.
Gerry

Farintosh 07-13-2014 08:23 AM

Quote:

Originally Posted by plumber (Post 8161568)
Too many horses in the barn already.
If your thinking of buying and are going to look again I could offer my 2 cents.
Let me know I could meet you there.
Gerry

I'd really appreciate the Gerry, I'm sure you have far more knowledge on these matters than I do. Maybe you could send me a pm with your number and when you're free to talk so I can pick your brain over the phone? I'm afraid I'm heading out of town for work until next weekend so won't be able to make it downtown today.

Thanks,

Geoff

SilberUrS6 07-13-2014 12:26 PM

Fixing those add-on flares might be spendy, for sure. That's a buttload of Bondo to have that kind of cracking.

Worse, that motor is mated to a 915. A regular 915 can't take that kind of "go" for long. Even a built 915 is not the best choice. I'd be really wary on this car, even for that kind of money.

Farintosh 07-13-2014 04:00 PM

Car has been sold and not to me unfortunately, everyone made an offer and I had the highest cash offer until a gentlemen showed up in a trailer, he asked how much to beat my offer and went just over without me being informed or having a chance to bid. Bit frustrating but life goes on, the car certainly wasn't perfect (body, tranmission, etc) and I wasn't going to commit without a ppi on a car like that. Everything happens for a reason as they say.

Thank you so much to everyone who contributed! I've learned so much from all of you and hope I can get into the game soon myself!

Farintosh 07-22-2014 02:56 PM

Guess what car is back on the market for an extra $16,000....

1985 Porsche 911 Turbo for $35,000 in LONDON | autoTRADER.ca

The seller/buyer has neglected some details so I hope no one gets caught!

puddy 07-26-2014 02:26 AM

Wow I just noticed this on the auto trader this morning, I guess his intention was to just flip it? Too bad, seemed like decent value at the original price.


All times are GMT -8. The time now is 10:39 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.