|
|
|
|
| Author |
|
|
Slightly Knowledgeable
|
Type of fastener for door lock assembly?
'02 996 Carrera
The part of the door lock assembly inside the door is fastened with two screws. Per the Pelican parts site, they are "Oval-Head Screw for Door Lock 8 x 14". A Torx T-40 driver fits in these screws, but that doesn't appear to be the right tool. Is the right tool a 12 point MM triple square spline bit socket in about M4 or M5 size or so? Thanks in advance!
__________________
2009 Porsche 911 C2S, 2002 Porsche C2S (traded) |
||
12-20-2021, 03:49 PM
|
|
|
Slightly Knowledgeable
|
Lots of people saw this thread, but haven't replied.
I've spring for a set of 12-point metric spline bits. I'm reasonably sure these are what I need.
__________________
2009 Porsche 911 C2S, 2002 Porsche C2S (traded) |
||
|
12-21-2021, 11:46 AM
|
|
|
Slightly Knowledgeable
|
Just to satisfy the morbid curiosity of the 72 folks who looked at this thread, the fasteners for the door lock take an M8 12 point triple square spline bit.
__________________
2009 Porsche 911 C2S, 2002 Porsche C2S (traded) |
||
|
12-22-2021, 04:11 PM
|
|
2009 Porsche Carrera S (997.2)
2002 Porsche Carrera Coupe
