996/997/993 Tons of wheels F/S Photos

[Wheel Dynamics]

We have a ton of Genuine and aftermarket Porsche 996/997 fitment wheels available, most are refinished and some are sold "as-is". IF YOU DON'T SEE WHAT YOU NEED PLEASE CALL 50% OF THE TIME WE WILL HAVE WHAT YOU NEED.

Here is less than 1/2 of what I have right now on the used stuff:

Send me a message at: [email protected]

[BYprodriver]

I am looking for some of the wheels in the pic above except in the rear Boxster fitment

9" width

[Wheel Dynamics]

Originally Posted by BYprodriver

I am looking for some of the wheels in the pic above except in the rear Boxster fitment

9" width

These wheels are pretty rare to come in these days, with most of them being scooped up by those track-hounds. This set is maybe one of three sets we've had this past year but none have been Boxster fit.

I would suggest if you really want a set consider the 911 sets and use a 17mm rear spacer. Doing this will give you more purchase options and also will give you one additional inch to the gound on each side.

If I can help, let me know....

[BYprodriver]

Running the 10" rear now which I would trade for 9" or buy outright.

[tdubs]

Do the lobster claws fit on the 993 NB?

[Wheel Dynamics]

Originally Posted by tdubs

Do the lobster claws fit on the 993 NB?

Lobster claws are too wide in the rear unless you have the narrow-set-up, and if you have those the off-sets are low and so no they won't work....if you can find a 9" the off-set at 47 then you can but you'll need to keep the tire sizing to a min. Most of the Lobsters are 11" wide rears though... You'll just need to keep an eye out.

-Wheel Dynamics

[Wheel Dynamics]

Originally Posted by BYprodriver

Running the 10" rear now which I would trade for 9" or buy outright.

Sorry, I only have one set available as of now in 18x8 and 18x10 (et. 65)

-Wheel Dynamics

[Wheel Dynamics]

Thanks for the messages guys, let me know if you are ready to do something...

Here is an other set just added to the pot: INFO LINK

[bluesporto]

Are the Turbo wheels for a 997 Turbo and are they available? If so, what are you asking? Please email at [email protected] or text at 661-747-4416 Thanks

[BYprodriver]

Originally Posted by BYprodriver

Running the 10" rear now which I would trade for 9" or buy outright.

Still looking to trade for 9"s

Also have a chrome 9" to trade.

[Wheel Dynamics]

Originally Posted by bluesporto

Are the Turbo wheels for a 997 Turbo and are they available? If so, what are you asking? Please email at [email protected] or text at 661-747-4416 Thanks

Hi there Loren,

We just sent you an Email with about 10-high res photos, our price on this set is probably the best around right now, we only have one set so check your in-box and let us know...

We also offer tire packages so they can be installed and ready to roll when they arrive or if you are local you are welcome to roll-in and roll out..

https://www.youtube.com/watch?v=aDltYDFunbY

OPEN HOUSE EVENT INVITE: Untitled Document

[Wheel Dynamics]

Originally Posted by BYprodriver

I am looking for some of the wheels in the pic above except in the rear Boxster fitment

9" width

Hi there,

Since there are a few photos listed can you please post a photo of yours so we can double check to see what we have available?

Thanks,

[BYprodriver]

Originally Posted by BYprodriver

Still looking to trade for 9"s

Also have a chrome 9" to trade.

Here it is, 7.5" on front, 10" on rear. Want to buy or trade for 9"

[Wheel Dynamics]

Originally Posted by BYprodriver

Here it is, 7.5" on front, 10" on rear. Want to buy or trade for 9"

Hi there,

I know we had a set recently however we have since sold the set, if we bump into an other we will reach out, (however it is better to call every couple months if you do not hear back).

Never know what might roll in...

Take care,

Untitled Document