|
|
|
|
| Author |
|
|
Registered User
Join Date: Jan 2013
Posts: 27
|
What would you do while the motor is out?
So, I've pulled the motor out of my wife's totaled '00 C2 and am putting it in a 986. While I've got the motor out, my plan is to clean and "freshen" it. The goal is to take care of any preventative maintenance while the motor is out of the car and everything is easily accessible. I've already installed an LNE IMS bearing, what else would you do?
|
||
07-20-2014, 06:17 AM
|
|
|
Registered
Join Date: Aug 2010
Location: Earth.............
Posts: 2,908
|
Latest version of RMS, new AOS (it is out in the open with the engine out), new water pump and low temp thermostat, check all oil seal areas (cam cover, plug tubes, etc.) for any signs of weeping.
__________________
Accrochez-vous bien de vos rêves..........." |
||
|
07-20-2014, 07:31 AM
|
|
|
Registered
Join Date: Jan 2008
Location: NJ
Posts: 1,186
|
I would add the DOF IMSB cover.
DIRECT OIL FEED (DOF) FOR IMS BEARINGS | TuneRS Motorsports
__________________
2013 991.1 Carrera S Cab 2004 996 Turbo CAB X50 sold 2003 996 cab 6 speed Sold 1972 RS 3.2 twin plug short stroke crank fire, roll bar, sold DE instructor since 1985 |
||
|
07-20-2014, 05:55 PM
|
|
