|
|
|
|
| Author |
|
|
Registered User
|
996 TT rear sag?
Guys,
I just picked up an '02 996 TT and it came with H&R sport springs with Bilstein B8 shocks, H&R adjustable sway bars, rear adjustable toe links. I just ordered rear upper adjustable control arms to get some positive camber as the best I can get now is -3.5deg. Here is my question, when I measure the ride height (floor to wheel arch) I get 25.5" front and 25" rear. Why is the rear sagging? I check all the components and everything looks in good shape. The suspension kids were supposedly done 1yr. ago. What can I do to correct this? Other than coilovers, I like the ride as it is now but want to have a even ride height or a bit of a rake. Thx. |
||
05-31-2015, 09:42 AM
|
|
|
Registered
Join Date: Jul 2006
Location: Honolulu, HI
Posts: 9,961
|
My car is 23k, stock suspension on 19s. 26.5 F, 26.25 R
__________________
The fun - '06 Carrera, '79 930, '06 S4 Avant, '16 i8 The mundane - '24 Tesla Model 3, '22 Tesla Model Y, '19 Tacoma |
||
|
06-05-2015, 11:59 PM
|
|
|
Registered User
|
Im going through something similar, but I have 26 1/2 in the rear and the same in the front but the car looks like its to high in front for some reason? so i filled up my gas tank and loaded 2, 5 gallon pails of paint in the trunk to see if I could get the front end to drop a 1/2inch, it did and it looked perfect, so now im going to lower the front end to 26" by adjusting the torsion bars in the front end, check out this link:
Pelican Technical Article: Lowering the 911 - 911 (1965-89) - 930 Turbo (1975-89)  
|
||
|
06-06-2015, 11:19 AM
|
|
Flat6
